Question: How do I fix SOLIDWORKS rebuild errors?

How do I force a solidworks rebuild?

Click Rebuild (Standard toolbar) or Edit > Rebuild, or press Ctrl + B. Rebuilds only the features that changed since the last rebuild. To rebuild all features, press Ctrl + Q.

Why is my part red in Solidworks?

The text of the part or feature is in red. Indicates an error with a feature. This icon appears on the feature name in the FeatureManager design tree.

What’s wrong solidworks?

To review errors or warnings using the What’s Wrong dialog box: Right-click the sketch, feature, part, or assembly name and click What’s Wrong?. Error or Warning . The name of the feature and its icon in the FeatureManager design tree.

Why does solidworks need to rebuild?

After you make changes in a model, you rebuild the model to update features and check for errors. Various tools are available to rebuild parts, assemblies, drawings, and sketches. Rebuilds changed features.

What is verification on rebuild solidworks?

The Verification on rebuild option provides an extremely rigorous evaluation of the model during rebuild, but can slow down rebuild performance. When this option is off, the software checks every new or changed feature against any adjacent faces and edges.

How do I repair a sketch in Solidworks?

To open the Repair Sketch tool: Click Tools > Sketch Tools > Repair Sketch. Repair Sketch deletes these from the sketch. Repair Sketch merges these into a single entity.

What does Cannot locate end of feature solidworks?

You may get an error which says “Cannot locate end of the feature.” This results because the extrude direction is incorrect. If that’s the case, click the “switch direction” button next to the end condition menu (it looks like two parallel, opposing arrows) and Solidworks will reverse the extrusion direction.

How do I turn on the freeze bar in Solidworks?

To turn on the freeze bar, click Tools > Options > System Options > General and select Enable Freeze bar. To freeze features: Move the pointer over the freeze bar.

How do I edit a sketch plane in Solidworks?

Select the sketch in the FeatureManager design tree, and click Edit, Sketch Plane. Right-click the sketch in the FeatureManager design tree, and select Edit Sketch Plane . Select a new plane in the FeatureManager design tree or select a new planar face in the model for Sketch Plane/Face . Click OK .

How do I find a circular reference in Solidworks?

In your assembly, simply go to your Command Manager, click on the Evaluate tab, then the Performance Evaluation. Alternately, you could use the dropdown menu and go to Tools > Evaluate > Performance Evaluation.

How do I turn on quick snaps in Solidworks?

You can enable Quick Snaps, regardless of whether Enable snapping or the Sketch Snap is selected under Options > System Options > Relations/Snaps . Double-click Quick Snaps on the toolbar to retain the snap capability for multiple instances of the same sketch entity, or until you select different Quick Snaps.