Question: How do I add slab edges in Revit?

How do you edit a slab edge family in Revit?

In the Revit Project Model, select the Slab Edges Tool (Structure Tab – Floors – Slab Edges). Duplicate the current Slab Edge Family in the Type Properties, give it a new name and apply the new Profile Family within the Edit Type Properties Menu. Press Apply and OK.

How do you slab thicken in Revit?

To apply the thickening we click on the bottom edge of the floor, and we can then edit the Horizontal offset. We then need to make sure that both the Floor and Slab Edge thickening are the same material by selecting each element in turn and going to Edit Type in the Properties window.

What is a thickened edge?

A thickened-edge slab, also known as a monolithic slab, integrates the footing and the slab in a way that allows all of the concrete to be placed at the same time. The perimeter footing of a thickened-edge slab isn’t very deep.

What is a slab edge plan?

Edge-of-Slab drawings are working drawings that show the location of all joints and formed edges in concrete, including construction joints, expansion joints, isolation joints, cold joints, contraction joints, and all other bulk head.

What is a slab thickening?

As the name suggests, a slab is a single layer of concrete, several inches thick. The slab is poured thicker at the edges, to form an integral footing; reinforcing rods strengthen the thickened edge. The slab normally rests on a bed of crushed gravel to improve drainage.

What is slab edge insulation?

Slab edge insulation keeps heat in or out of a house, depending on the climate and the season. A slab can be insulated with rigid foam, mineral wool, or other rigid insulation rated for below-grade use. The above-grade insulation needs to be protected from UV radiation and impact damage.

Does slab on grade have footings?

A slab-on-grade is a type of shallow foundation in which a concrete slab rests directly on the ground below it. A slab-on-grade foundation usually consists of a thin layer of concrete across the entire area of the foundation with thickened footings at the edges or below load bearing walls in the middle of the building.

What is a concrete upstand?

When you are insulating a concrete floor a strip of insulation should be laid vertically around the edge of the room. This vertical strip of insulation is called an upstand.

How do you thicken a slab edge?

Fill and Level

1. Spread and tamp three-inch layers of granular fill to within five inches of the top of the forms. …
2. Stretch a string across the top of the forms and measure down to the ground. …
3. Subtract the thickness of your slab. …
4. Slope the fill down along the edges to create a thickened edge of concrete.

What is slab curling?

Curling is the distortion of a slab into a curved shape by upward or downward bending of the edges. This occurs primarily due to differences in moisture and/or temperature between the top and bottom surfaces of a concrete slab.

How thick should the edge of a concrete slab be?

There are times where thicker slabs will make more sense, but, most of the time, 4 inches is the perfect thickness for a concrete slab. It is, however, wise to make the perimeter of the slab an inch or two thicker. This will help the slab withstand soil erosion and cracking.