How is cut and fill volume calculated in Civil 3d?

How do you calculate cut and fill volume?

The volume between each pair of sections is estimated by multiplying the average cut or fill area of the two sections by the distance between them. Once these volumes have been calculated for each pair of sections the total cut and fill volumes are obtained by adding them all together.

How do you calculate volume in 3D civil?

To calculate volumes in Civil 3D 2014: After creating your ground surface and your graded surface, click the Analyze Tab → Volumes and Material Panel (as shown above).

How do you calculate a filling?

Suppose we need to fill the plot by 3’5” = 3.41 feet. So, the depth of the plot = 3.41 feet. Volume of plot to be filled = 1200 x 3.41 = 4092 cft.

How do you use cut and fill in Civil 3d?

Solution:

1. In command line type “COMPUTEMATERIALS”.
2. Select the alignment and sample line group to sample, then click “OK”.
3. Change “Quantity takeoff criteria” to “Cut and Fill” or other desired criteria.
4. Map the sampled surfaces to the correct object names, then click “OK”.

What is cut and fill factor in Civil 3d?

For Cut and Fill Factor, let’s use 1.10. These factors control, depending on the soil type, how much the material swells after removal, or how much it is compacted when put in place. This means that for every cubic meter or feet of cut material we will need to haul 1.1 cubic meter or feet.

How do you generate cut & Fill Report?

Click Analyze tab Volumes and Materials panel Volumes Dashboard Find. In the Volumes Dashboard, select the volume surfaces and bounded areas you want to include in the report so they have a check mark next to them. Click Generate Cut/Fill Report.

How do you calculate cut and fill volume by hand?

This method involves drawing horizontal and vertical lines over your site plan to divide it into grid cells of equal size. You then include the existing elevation and proposed elevation for each corner of the grid cells, and work out the difference between the two, as this will be cut or fill depth for that spot.

How does cut and fill work?

Cutting and filling is the process of moving earth from one place to another to make ground more level. A ‘cut’ is made when earth is cut from above the desired ground height and a ‘fill’ is when earth is used to fill a hole to desired ground level.

What is cut and fill volume?

The cut portion is the volume between the upper and lower surface when the upper surface is above the lower surface. The fill portion is the volume between the upper and lower surfaces when the upper surface is below the lower surface.