How does solidworks rebuild work?

What does rebuilding in Solidworks do?

After you make changes in a model, you rebuild the model to update features and check for errors. Various tools are available to rebuild parts, assemblies, drawings, and sketches. Rebuilds changed features. Rebuilds changed features in all configurations.

What is rebuild error in Solidworks?

With Stop or Prompt, the rebuild action stops for each error so you can fix feature failures one at a time. Some common rebuild errors include: Dangling Dimensions or Relations. Dimensions or relations to an entity that no longer exists. Features that cannot be rebuilt, such as a fillet that is too large.

How do you auto rebuild in Solidworks?

To defer the update of assemblies: Right-click the assembly name at the top of the FeatureManager design tree, and select Suspend Automatic Rebuild. (Rebuild Suspended) appears in the status bar. To manually update when in Suspend Automatic Rebuild mode, click Rebuild on the Standard toolbar.

Where is the rebuild tool in Solidworks?

The Rebuild toolbar buttons are located on the Standard toolbar. You can add the tools to the CommandManager, shortcut bars, and mouse gestures.

How do I force a solidworks rebuild?

Click Rebuild (Standard toolbar) or Edit > Rebuild, or press Ctrl + B. Rebuilds only the features that changed since the last rebuild. To rebuild all features, press Ctrl + Q.

How do I stop a solidworks rebuild?

Click Tools > Options > System Options > Assemblies and under When Large Assembly Mode is active, select Suspend automatic rebuild.

How do I repair a sketch in Solidworks?

To open the Repair Sketch tool: Click Tools > Sketch Tools > Repair Sketch. Repair Sketch deletes these from the sketch. Repair Sketch merges these into a single entity.

How do you check for failures in Solidworks?

To identify failing components: After meshing has failed, right-click the Mesh icon and select Failure Diagnostics. To identify the problem with a component, select it in the list box. All faces and edges of the selected component that caused the meshing to fail highlight in the graphics area.

How do I run a diagnostic in Solidworks?

To initiate Import Diagnostics:

1. When you import a model with faults, a message asks if you want to run Import Diagnostics. Click Yes.
2. With a model open, click Import Diagnostics (Tools toolbar) or Tools > Evaluate > Import Diagnostics. The Import Diagnostics PropertyManager opens.

How do I find a circular reference in Solidworks?

In your assembly, simply go to your Command Manager, click on the Evaluate tab, then the Performance Evaluation. Alternately, you could use the dropdown menu and go to Tools > Evaluate > Performance Evaluation.

How do I terminate solidworks?

Interrupting the Execution of a Command

1. Press Esc. – or –
2. Right-click and click Cancel.

How do you show all parts in Solidworks?

Right-click on the blank graphics area and select “Show Hidden Components.” SOLIDWORKS will display any components hidden in the assembly. If you click on the component, it will show it when you exit this state (which can be done by clicking Escape on your keyboard or clicking “Exit Show-Hidden”).

How do I make Solidworks full screen?

To access full screen view: Click Full Screen View (Standard toolbar) or View > Full Screen. To access menus when in full screen view, hover the pointer at the top of the screen.