How do you smooth a feature line in Civil 3D?

How do I smooth a line in AutoCAD?

Enable Smooth Line Display



On the command line in AutoCAD, type LINESMOOTHING and set it to On or 1.

How do you fillet a feature line in Civil 3d?

Click Modify tab Edit Geometry panel Fillet Find. Select the feature line or other object.

…

To Fillet Feature Lines

1. Select the corner to fillet. …
2. Enter Radius to specify a different radius.
3. Enter All to fillet all corners.
4. Enter Join to join a connecting feature line and then select the feature line.

How do you grade a feature line?

Feature line grading involves creating a set of feature lines to define the graded region as surface breaklines, and then adjusting the elevation of key points to control the shape of the surface. This technique is ideal for wide, fairly flat areas, such as parking lots or building pads.

How do I draw a smooth curve in Autocad?

To Draw a Line and Arc Polyline

1. Click Home tab Draw panel Polyline. Find.
2. Specify the start point of the polyline segment.
3. Specify the endpoint of the polyline segment. …
4. Specify additional polyline segments as needed.
5. Press Enter to end, or enter c to close the polyline.

How do you offset a feature line in Civil 3d?

Click Home tab Create Design panel Feature Line drop-down Create Feature Line From Stepped Offset Find. Do one of the following to specify the location for the offset: Specify the offset distance, then select the object to offset. Enter Through, then select the object to offset and select a through point.

What is fillet command?

Rounds or fillets the edges of two 2D objects or the adjacent faces of a 3D solid. Find. A round or fillet is. an arc that is created tangent between two 2D objects. a curved transition between two surfaces or adjacent faces on a 3D solid.

How is fillet pronounced in CAD?

The culinary pronunciation is “fil-AY,” while the engineering pronunciation is “FILL-it.”

How do you create a grading side slope from a feature line in Civil 3d?

When prompted to select a feature, click the blue feature line that is offset from the building pad. When prompted to select the grading side, click outside the offset feature line. Press Enter to apply the grading to the entire length of the feature line. Press Enter to accept the default Slope Cut Format.

How do you add elevation points to a feature line?

To insert a feature line elevation point by selecting a location

1. Click Modify tab Edit Elevations panel Insert Elevation Point Find.
2. Select the feature line or other object.
3. Click to select the location along the feature line to insert the elevation point.
4. Specify the elevation by entering a value.