How do you run a leader line in Solidworks?

How do you use leaders in Solidworks?

To add new leaders to an existing annotation: Select the annotation.

…

Multiple Leaders

1. After selecting the properties for the annotation, click in the graphics area to place the first leader.
2. While dragging the annotation and before placing it, press Ctrl. …
3. Click as many times as necessary to place additional leaders.

How do you change leader lines in Solidworks?

Click Options , and then select the Document Properties tab. Select the type of annotation or dimension for which you intend to customize the frame or leader line thickness. Select a thickness from the list, or select Custom Size and enter a value for the custom thickness. Select a style from the list.

How do you bend a leader line in Solidworks?

Right-click a dimension extension line and select Display Options > Jog. Horizontally or vertically drag a point on the dimension extension line to create a bend.

What are leader lines?

The leader line is a section of line that ties to your hook or lure and is connected to your mainline by either knot or a swivel. The leader lines purpose is to present a lure or bait naturally. The best way a leader line can do this is being invisible underwater.

How do you draw a leader in Solidworks?

In SOLIDWORKS the Multi-jog Leader command allows you to draw arrows with various end shapes. This command can be found from Insert > Annotation > Multi-jog Leader. This command works very similar to the Line command. The default for the command is to continue adding lines until it is selected to end.

What are leader lines and used drawing?

Leaders are used to indicate information about hole diameters, radii, and other information that occurs as a specific location or on a particular surface on the drawing. Leaders are drawn as straight lines, but they must be drawn at an angle other than horizontal or vertical.

How do you draw a leader line in CAD?

To Create a Leader With Straight Lines

1. Click Home tab Annotation panel Multileader. …
2. At the Command prompt, enter o to select options.
3. Enter l to specify leaders.
4. Enter s to specify straight leaders.
5. In the drawing, click a start point for the leader head.
6. Click an end point for the leader.
7. Enter your MTEXT content.

How do you use the multi jog leader in Solidworks?

Creating a Multi-Jog Leader

1. Click Multi-jog Leader. …
2. Click the drawing sheet, any model geometry, a dock point of an annotation, or a sketch entity.
3. Move the pointer and click in the graphics area for each jog point. …
4. Complete the leader by clicking an entity such as an edge, or double-click the drawing sheet.

How do I get my solidworks toolbar back?

To display SOLIDWORKS toolbars:

1. Right-click in the window border, click Toolbars, and select or clear a toolbar name.
2. Click Tools > Customize. On the Toolbars tab, select the toolbars to display.

How do I make dimension lines thinner in Solidworks?

To set line thickness:

1. In a drawing, click Tools > Options > Document Properties > Line Thickness.
2. In the dialog box, under Line thickness print settings, enter a value for the line weights (Thin, Normal, Thick, and five additional line thickness settings). …
3. Click OK.

How do you break a dimension line in Solidworks?

On the Leaders tab of the respective PropertyManager, under Break Lines:

1. Select Break extension lines to break extension lines around dimension lines and other extension lines.
2. Select Break dimension line to break the dimension line around other dimension lines and other extension lines.

Where is document properties in Solidworks?

The document properties that are available on the left side of the Document Properties tab depend on the type of document that is open. Some document properties are relevant to all document types (parts, assemblies, and drawings), while others are not.