Contents

1. In the Shaft Generator dialog box, select the Thread option.
2. In the Thread Selection dialog box, select the thread type to be inserted.
3. In the corresponding dialog box, you can specify the geometrical values for the section.

## How do you make a threaded rod in Solidworks?

1. Open a part file. The diameter of the cylinder is 6mm. …
2. Click Insert > Features > Thread .
3. In the graphics area, select the top edge of the cylinder.
4. In the PropertyManager, under Specification: In Type, select Metric Die. …
5. Under Thread Location: Click Offset. …
6. Under End Condition, click Maintain Thread Length. …
7. Click .

Tutorial: Draw a 3D threaded bolt

1. Start a new drawing using acad3d. …
2. Type plan to see the view from the top.
3. Create a new layer, object, and make it blue.
4. Start the POLYLINE command, specify a start point anywhere in the middle of the screen, and draw segments as follows: …
5. Start the REVOLVE command and select the polyline.

To Specify the Thread Style for Drawing Views

1. Click Layout tab Styles and Standards panel Dialog box launcher. Find.
2. In the Drafting Standards dialog box, in the Thread style section, click the desired thread style.
IT IS INTERESTING:  How do I stop snapping in AutoCAD?

## How do you draw a bolt?

Here are step-by-step instructions for drawing bolts and nuts for exploded assemblies.

1. Make a circle from the rightmost node point to the one just to the left of it.
2. Draw a line from the center point down to the quadrant point of the circle.
3. Use grips to move the end point up to the middle.

## How do you make a hexagonal nut in AutoCAD?

Tutorial – Making a Hex Nut in AutoCAD 2004?

2. Make a Polygon using polygon command with 6 side center at 0,0 circumscribed in a circle of radius 36mm.
3. Make a circle at origin of radius 20mm.
4. Use region command and select all and then press enter. …
5. Views>>3D Views>SE Isometric.

## How do you design a thread?

How to design an internal thread?

1. Create two circles. We make on 13 mm in diameter and second 8 mm. Make sure their middle points are aligned.
2. Extrude. Use the Extrude option on the outer circle. We extruded it 3 mm.
3. Thread tool. Choose the Thread Tool in the Create tools. Select the inside wall and adjust the settings.

1. Determine if the thread is straight (parallel) or tapered. The thread is tapered if the diameter increases or decreases. …
2. Measure the thread diameter. …
3. Determine the number of threads per inch (TPI) or the pitch (metric threads) with the thread gauge. …

## How do I create an internal thread in Solidworks?

How do you create an internal thread in Solidworks?

1. Open a part file. The diameter of the cylinder is 6mm.
2. Click Insert > Features > Thread .
3. In the graphics area, select the top edge of the cylinder.
4. In the PropertyManager, under Specification: In Type, select Metric Die.
5. Under Thread Location: Click Offset.
6. Under End Condition, click Maintain Thread Length.
7. Click .
IT IS INTERESTING:  Question: What is Infrawork software?

16 мая 2020 г.