How do you make a symmetric relation in SolidWorks?

What is symmetric relation in SolidWorks?

Symmetric. A centerline and two points, lines, arcs, or ellipses. The items remain equidistant from the centerline, on a line perpendicular to the centerline.

How do you create a relationship between parts in SolidWorks?

To create a part within an assembly:

1. Click New Part (Assembly toolbar) or Insert > Component > New Part.
2. For externally saved parts, type a name for the new part in the Save As dialog box and click Save.
3. Select a plane or planar face (while the pointer is ).

How do I create a angular dimension in Solidworks?

Creating Angular Dimensions Between Two Lines

1. In an open sketch, click Smart Dimension. (Dimensions/Relations toolbar) or Tools > Dimensions > Smart.
2. Click one line.
3. Click the second line.
4. Move the pointer to show the angular dimension preview.
5. Set the value in the Modify box and click .
6. Click to place the dimension.

How do you measure symmetry?

Usually, to measure symmetry, a CMM is set up to calculate the theoretical midpoint datum plane, measure the surfaces of both required surfaces, and then determine where the midpoints lie in reference to the datum plane. This is a complex and sometimes inaccurate method for determining if a part is symmetrical.

What is a draft angle in Solidworks?

Draft tapers faces using a specified angle to selected faces in the model. One application is to make a molded part easier to remove from the mold. You can insert a draft in an existing part or draft while extruding a feature. You can apply draft to solid or surface models.

How do I show a construction line in Solidworks?

Click Construction Geometry. on the Sketch toolbar. Click Tools > Sketch Tools > Construction Geometry. Select the For construction check box in the PropertyManager.

How do you make multiple parts in Solidworks?

To split bodies:

1. Click Split (Features toolbar) or Insert > Features > Split.
2. In the PropertyManager, set the options. …
3. Under Resulting Bodies, select the bodies to save under , or click Auto-assign Names. …
4. Double-click the body name under File, type a name for the new part in the dialog box, then click Save. …
5. Click .

How do you switch between configurations in an assembly?

Configure Component

1. In an assembly, right-click a component and click Configure Component .
2. In the Modify Configurations dialog box, you can: Create new assembly configurations. Change the component configuration used in each assembly configuration. Suppress or unsuppress the component for each assembly configuration.

How do you mate in Solidworks?

To add a mate: Click Mate (Assembly toolbar), or click Insert > Mate. In the PropertyManager, under Mate Selections, select the entities that you want to mate together for Entities to Mate . You can temporarily hide faces to select an obscured face by hovering over a face and pressing Alt.

What does Coradial mean in SolidWorks?

Coradial. Two or more arcs. The items share the same centerpoint and radius. Perpendicular. Two lines.

What is collinear relation in SolidWorks?

Collinear. Two or more lines. The items lie on the same infinite line. Coradial. Two or more arcs.

How do you add parallel relationships in SolidWorks?

To add parallel dimensions to a drawing:

1. Click Smart Dimension. (Dimensions/Relations toolbar) or Tools > Dimensions > Smart.
2. Click the geometry to dimension.
3. Use rapid dimensioning to place evenly spaced dimensions. Alternatively, move the pointer outside of the rapid dimension selector to place the dimension.