How do you make a radius in Solidworks?

How do you create a diameter dimension in Solidworks?

To create a diameter, move the pointer to the far side of the centerline. Click to place the dimension. for diametric dimensions. Select other lines or points in the sketch to create additional dimensions.

How do I make an arc line in Solidworks?

To autotransition between line and arc:

  1. Click Line. (Sketch toolbar) or click Tools > Sketch Entities > Line and sketch a line.
  2. Click the endpoint of the line, then move the pointer away. …
  3. Move the pointer back to the endpoint, then away again. …
  4. Click to place the arc.
  5. Move the pointer away from the arc endpoint.

How do you dimension to the edge of a circle in Solidworks?

To dimension between the edges of two arcs:

  1. Click Smart Dimension (Dimensions/Relations toolbar) or Tools, Dimensions, Smart.
  2. Select the edge of the first arc, and then select the edge of the second arc.
  3. Press Shift, and then click to apply the dimension between the two edges.
IT IS INTERESTING:  Is Blender better than Autodesk?

How do you change diameter to radius?

In that circle, find the middle point and draw a line. That line is the diameter. Just divide by two; half the diameter is the radius.

How do you change radius to diameter in Solidworks?

How to turn a radius dimension into a diameter (TLDR version)

  1. Select a dimension (in drawing, part or assembly)
  2. Look in the properties menu on the left.
  3. Click the Leaders tab.
  4. Click one of the two diameter buttons.

How do you rotate in SolidWorks?

Click Rotate Component (Assembly toolbar) or Tools > Component > Rotate. The Rotate Component PropertyManager appears, and the pointer changes to . Select one or more components in the graphics area. Select a component and drag in any direction.

How do you flip an arc in SolidWorks?

In the FeatureManager design tree, right-click the sketch containing the arc and click Edit Sketch . In the graphics area, right-click the arc and click Reverse Endpoint Tangent on the shortcut menu. The software reverses the tangency and flips the arc.

How do you make a 3 point arc in Solidworks?

To sketch 3 point arcs:

  1. Click 3 Point Arc .
  2. Click to set a start point.
  3. Drag the pointer. , then click to set an end point.
  4. Drag to set the radius.
  5. Click to set the arc.
  6. Click . Video: Sketching a 3 Point Arc.

How do you make two circles concentric in Solidworks?

Creating Dimensions Between Concentric Circles and Displaying Extension Lines

  1. In an open sketch, click Smart Dimension. (Dimensions/Relations toolbar) or Tools > Dimensions > Smart.
  2. Click the edge of one concentric circle, then click the edge of the second concentric circle.
  3. Click to place the dimension.
  4. Click .
IT IS INTERESTING:  How do you create a detail in Revit?

How do I center a circle in a circle in Solidworks?

Make sure the Linear Center mark icon is selected under Manual Insert options section. Now scroll to the bottom of Center mark property manager and type in the value for the angle you want for center mark > hit enter. Click on the circular edges to add center marks.

How do you find the radius of a circle in SOLIDWORKS?

Measures distance, angle, radius, and size of and between lines, points, surfaces, and planes in sketches, 3D models, assemblies, or drawings. To open the Measure dialog box: Click Measure (Tools toolbar) or Tools > Evaluate > Measure.

How do you add a radius dimension in SOLIDWORKS drawing?

With a drawing open, click Options (Standard toolbar), select Document Properties, and then select Dimensions > Radius.

How do you use Dimensions in circles?

Create a Radius or Diameter Dimension

  1. Click Annotate tab Dimensions panel Dimension. …
  2. Select an arc or a circle.
  3. At the prompt, enter r (Radius) or enter d (Diameter).
  4. Before specifying the dimension line location, you can edit or rotate the text.
  5. Click to place the dimension line.
Special Project