How do you make a mesh gear in Solidworks?

How do you get gears to mesh in SOLIDWORKS?

Gear Mates

1. Click Mate (Assembly toolbar) or Insert > Mate.
2. In the PropertyManager, under Mechanical Mates, click Gear .
3. Under Mate Selections, select the rotation axes on the two gears for Entities to Mate .
4. Under Mechanical Mates: Option. Description. Ratio. …
5. Click .

How do you make a gear in SOLIDWORKS?

Navigate and Right click “Spur Gear” from the listed options and left click “Create Part.” The part should appear in the main editing window. 4. Change the options in the left hand column (titled “Configure Component”) to create the desired gear.

What is required for gears to mesh?

Meshing gears must have the same module: A 1 module gear has 1 tooth for every mm of pitch circle diameter. Thus a 0.3 mod gear having 60 teeth will have a pitch circle diameter of 18 mm (0.3 *60).

How do I choose a spur gear?

To determine the value of module for a given gear, you measure the pitch length in millimeters and divide that value by π. For example, if the pitch length measured 9.425mm, this would be a module 3 gear. By incorporating π into the value of pitch, the metric dimensions of a spur gear are very simple to calculate.

What are gear ratios?

A gear ratio is the ratio of the number of rotations of a driver gear to the number of rotations of a driven gear. A colon is often used to show a gear ratio: gear ratio = rotations of a driver gear : rotations of a driven gear.

How do I make a SOLIDWORKS toolbox?

Welcome to Toolbox Setup

1. In SOLIDWORKS, click Tools > Options > Hole Wizard/Toolbox > Configure .
2. From Windows, click Start > All Programs > SOLIDWORKS version > SOLIDWORKS Tools > Toolbox Settings .
3. When Toolbox is loaded and a document is open in SOLIDWORKS, click Toolbox > Configure.

How do you create involute gear in SOLIDWORKS?

Accurate Involute Gears in SolidWorks

1. Select Tools / Equations…
2. In the Equation dialog change Angular equation units to Degrees.
3. Enter each of the above equations into the table into the Global category. …
4. Select OK to exit the dialog.
5. Select Insert / Boss/Base / Extrude… to create a cylindrical gear blank.

Do gears and mesh need same pitch?

You can use the pitch diameter to calculate how far away two gears should be: the sum of the two pitch diameters divided by 2 is equal to the distance between the two axes. Diametral Pitch: The ratio of the number of teeth to the pitch diameter. Two gears must have the same diametral pitch to mesh.

What are the 4 types of gears?

Different Types of Gears and Uses

• Spur gears.
• Helical gears.
• Bevel gears.
• Worm gears.
• Rack and pinion.

Do gears need the same pitch?

Gears must have the same pitch or module in order to work together. To measure the pressure angle and pitch or module of a gear, use a Gear Tooth Pitch Identifier. If you don’t have a gear tooth pitch identifier, you can estimate a spur gear’s pitch or module.