How do you make a hole bigger in Fusion 360?

How do you change the hole in Fusion 360?

How to move a hole on a design in Fusion 360

1. Right-click on the sketch and select Edit Sketch.
2. On the sketch select the circle the hole is based off.
3. Click Modify > Move Copy.
4. Enter the X, Y and Z distances to move the circle.
5. Click OK.

How do you enlarge parts in Fusion 360?

Click the dimension tool and select a side and enter the size you want, at any time you can reedit the sketch, double click the dimension and change it.

How do I resize an image in Fusion 360?

Access the menu by right clicking on the canvass you’ve imported and you will see s selection for scaling the image. Pick the start and end point of the dimension, enter the dimension value and hit enter. Your image will now be scaled.

How do you stretch a sketch in Fusion 360?

Stretch Geometry

1. In a 2D sketch, click Sketch tab Modify panel Stretch . …
2. (Optional) In the Stretch dialog box, specify any of the following: …
3. In the graphics window, select the geometry you want to stretch: …
4. If necessary, click Base Point in the Stretch dialog box to switch to that mode.

How do you cut a body in Fusion 360?

How to trim a body in Fusion 360

1. From the Solid menu select Modify > Split body.
2. Select Body to Split.
3. Select Body to use as the splitting tool.
4. Select OK to create the split.

How do you cut a mesh body Fusion 360?

To split a mesh into smaller segments in Fusion, do the following: Import the mesh into Fusion 360. Switch off the Capture design history.

…

Choose Split Body.

1. Trim will cut the mesh at the plane and remove the remaining mesh. …
2. Split Body will split the mesh into two separate meshes at the plane.