How do you make a cylinder in SolidWorks?

How do you create a cylinder in SolidWorks?

To create a cylinder:

1. Click Solids > Draw > Cylinder (or type Cylinder).
2. Set an option for the cylinder’s base: …
3. Click in the graphics area or type values to specify the cylinder height. …
4. – or –
5. If you want the center of the top face of the cylinder to lie somewhere else, enter the Center of other end option.

How do you make a hollow circle in SolidWorks?

Steps

1. Click Solid > Create > Create Sketch .
2. Select the XZ plane to sketch on. …
3. Click Sketch > Create > Center Diameter Circle .
4. Hover over the origin (or center) of the sketch. …
5. Click once to begin placing the circle.
6. Drag the mouse away from the center to start sketching a circle. …
7. Click again to complete the circle.

How do you make a hydraulic cylinder?

Design criteria in hydraulic cylinders

1. Working conditions. In general, it’s essential to consider the working conditions – where and what – the hydraulic cylinder is designed to do and what kind of load it has to endure. …
2. Stroking distance requirements. …
3. Temperature. …
4. Speed. …
5. Capacity. …
6. Mounting styles. …
7. Cylinder bore size.

How do you flex in SolidWorks?

To create Flex features, click Flex (Features toolbar) or Insert > Features > Flex, set the PropertyManager options, and click .

…

Repositioning the Triad and Trim Planes

1. Select a coordinate system feature .
2. Change the Rotation Origin. , …
3. Change the Rotation Angle , , or to rotate the triad around these axes.

How do you make a cone in SolidWorks?

To create a cone:

1. Click Solids > Draw > Cone (or type Cone).
2. Set an option for the cone’s base: Center point base: Click in the graphics area to specify a center point or type the 3D coordinates. …
3. Set the cone height: Click in the graphics area or type a value. – or –

Is there a hollow feature in SolidWorks?

The shell tool hollows out a part, leaves open the faces you select, and creates thin-walled features on the remaining faces. If you do not select any face on the model, you can shell a solid part, creating a closed, hollow model. You can also shell a model using multiple thicknesses.

How do you fill a hollow shell in SolidWorks?

To create a filled surface, click Filled Surface on the Surfaces toolbar, or click Insert > Surface > Fill, set the PropertyManager options, and click OK .

How do I make a cavity in SolidWorks?

To create a cavity in the mold base:

1. Optional: Insert the design parts and the mold base into an interim assembly.
2. In the assembly window, select the mold base, and click Edit Component on the Assembly toolbar. …
3. Click Cavity on the Mold Tools toolbar, or click Insert > Mold > Cavity.