How do you lock a view in Revit?

How do you lock a 3D view?

How To Lock a 3D View

1. Create and save the 3D view so it appears in the project browser.
2. Setup the 3D view to how you want it to look.
3. To lock the 3D View click the “Locked 3D View” button found at the bottom of Revit, it looks like a house with a padlock.

How do I save orientation and lock view in Revit?

Open the 3D view in which you want to tag elements and set the orientation. On the View Control Bar, click Save Orientation and Lock View .

How do I lock a place in Revit?

Use Pins to Lock Elements in Place

1. Select the elements to be pinned, and then click Modify | tab Modify panel (Pin).
2. Click Modify tab Modify panel (Pin), select the elements to be pinned, and then press Enter .

How do you lock zoom in Revit?

Right-click the ViewCube and click Lock to Selection. If Lock to Selection is checked when a view orientation change occurs, the ViewCube uses the selected objects to calculate the center of the view and zooms to the extents of the selected objects.

How do you save an isometric view in Revit?

Use the SteeringWheels tool to save a view.

1. If SteeringWheels are not displayed in the drawing area, click (Full Navigation Wheel) on the navigation bar.
2. Right-click the SteeringWheels, and click Save View.
3. Enter a name for the new 3D view, and click OK.

How do you lock an angle in Revit?

After you have it – select command Align, click on vertical reference plane and then on start point of the line (use Tab to cycle through overlapping elements) and click the lock to lock it.

Where is the view control bar in Revit?

The View Control Bar is located at the bottom of the view window above the status bar and includes the following tools: Note: The exact tools available on the View Control Bar depends on the view type. Show/Hide Rendering Dialog (Available only when the drawing area displays a 3D view.)

Can you lock something in Revit?

The lock can be applied to an entire Revit Server Host, all the models in a folder, or a single model. Open the Revit Server Administrator. In the tree control, select the item, and click (lock).

How do you unpin a view in Revit?

Unpin Elements

1. Select the elements to be unpinned, and then click Modify | tab Modify panel (Unpin).
2. Click Modify tab Modify panel (Unpin), select the elements to be unpinned, and then press Enter .

How do you create a section box in Revit?

Select elements in the view, and then on the Modify tab, click Selection Box. The elements in the extension define the extents of the section box. The selection box tool can be used in 2D view. When used in a 2D view, the section box is applied to the default 3D view of the project.