How do you ground a part in Solidworks assembly?

How do you add a ground in Solidworks?

To define a ground plane: In an assembly, click Insert > Reference Geometry > Ground Plane. For assemblies that have an existing ground plane, right-click the Ground Planes folder in the FeatureManager design tree, and click Insert Ground Plane.

How do you unground a part in Solidworks?

To fix or float an assembly component:

1. Right-click the component in the graphics area or the component’s name in the FeatureManager design tree.
2. Select Fix or Float.
3. In assemblies with multiple configurations, select This Configuration , All Configurations , or Specified Configurations .

How do you stop parts from moving through each other in Solidworks?

Select Stop at collision to stop the motion of the component when it touches any other entity. The faces that touch the component you are moving are highlighted. The computer beeps when a collision is detected.

What is ground plane in Solidworks?

You can define a ground plane in an assembly. When you insert a published asset into the assembly, the asset’s ground face snaps to the assembly’s ground plane.

When defining a ground plane in an assembly the reference feature can only be a plane?

You can define multiple ground planes in an assembly. You can have only one active ground plane at a time. To define a ground plane: In an assembly, click Insert > Reference Geometry > Ground Plane.

How do I fix a part in an assembly in Solidworks?

To fix or float an assembly component:

1. Right-click the component in the graphics area or the component’s name in the FeatureManager design tree.
2. Select Fix or Float.
3. In assemblies with multiple configurations, select This Configuration, All Configurations, or Specified Configurations.

Why is part fixed in assembly?

It is recommended that at least one assembly component is either fixed, or mated to the assembly planes or origin. This gives a frame of reference for all other mates, and helps prevent unexpected movement of components when mates are added.

How do you place a part on the origin in Inventor?

Place at Component Origin

1. On the ribbon, click Assemble tab Productivity panel Place at Component Origin .
2. Click to select an existing component within your assembly. …
3. In the Open dialog box, select the component to place.
4. Click Open to place the component and close the dialog box.

How do I use physical dynamics in SolidWorks?

Physical Dynamics

1. Click Move Component or Rotate Component on the Assembly toolbar.
2. In the PropertyManager, under Options, select Physical Dynamics.
3. Move the Sensitivity slider to change the frequency with which Physical Dynamics checks for collisions. …
4. If needed, specify the components to participate in the collision:

How do you stack parts in SolidWorks?

Right-click Smart Fastener in the FeatureManager design tree and select Edit Smart Fastener. In the PropertyManager, under Results, select the Group to which you want to add a washer. Under Series Components, select a washer in Add to Top Stack. The washer is added to Top Stack .