How do you fix an end in Solidworks?

How do you un fix something in Solidworks?

To change the fix or float, go to featuremanager deign tree. Select and right click on the component’s name for changing the fix or float condition. Select fix or float from the appearing menu as per your requirement.

How do you fix mates in Solidworks?

Try these actions, which sometimes fix the problem:

1. Drag a component to snap it into place.
2. Suppress and unsuppress the affected mates.
3. If the components are far from their correct positions, suppress some of their mates, move the components closer to their correct positions, then unsuppress the mates.

How do I fix errors in Solidworks?

To control the rebuild action:

1. Click Options (Standard toolbar) or Tools, Options.
2. Select Stop, Continue, or Prompt for When rebuild error occurs, then click OK.

How do you fix and Unfix parts in Solidworks?

To fix or float an assembly component:

1. Right-click the component in the graphics area or the component’s name in the FeatureManager design tree.
2. Select Fix or Float.
3. In assemblies with multiple configurations, select This Configuration, All Configurations, or Specified Configurations.

How do you suppress a mate in Solidworks?

Suppressing a Mate

1. Right-click the mate in the FeatureManager design tree, and select Properties.
2. Select Suppressed, and click OK. To unsuppress the mate, repeat the process, and clear the Suppressed check box.

How do you delete mates in Solidworks?

To delete a mate:

1. Click the mate in the FeatureManager design tree.
2. Take one of the following actions: Press the Delete key. Click Edit > Delete. Right-click and click Delete.
3. Click Yes to confirm the deletion.

How do you find a mate in Solidworks?

Hold down Ctrl, click the components, and then right-click. Right-click the subassembly in the FeatureManager design tree. Click View Mates . The View Mates window appears.

How do you check for failures in Solidworks?

To identify failing components: After meshing has failed, right-click the Mesh icon and select Failure Diagnostics. To identify the problem with a component, select it in the list box. All faces and edges of the selected component that caused the meshing to fail highlight in the graphics area.

What does Cannot locate end of feature solidworks?

You may get an error which says “Cannot locate end of the feature.” This results because the extrude direction is incorrect. If that’s the case, click the “switch direction” button next to the end condition menu (it looks like two parallel, opposing arrows) and Solidworks will reverse the extrusion direction.

What is rebuild in Solidworks?

After you make changes in a model, you rebuild the model to update features and check for errors. Various tools are available to rebuild parts, assemblies, drawings, and sketches. Rebuilds changed features. Rebuilds changed features in all configurations.

What is temporary fix group in Solidworks?

You can temporarily fix or group components to affect their behavior when you drag to move or rotate components. To fix or group components: Click Temporary Fix/Group (Assembly toolbar).

How do I move a fixed component in Solidworks assembly?

Click Move Component (Assembly toolbar) or Tools > Component > Move. The Move Component PropertyManager appears, and the pointer changes to . Select one or more components in the graphics area. Select a component and drag in any direction.

How do I reset a layout in Solidworks?

To return all toolbar options to the system defaults, click Reset To Defaults. To specify which toolbars appear for part, assembly, or drawing documents: Open a part, assembly, or drawing document. Click Tools > Customize, or right-click in the window border and select Customize.