How do you family cut a wall in Revit?

How do you make a Revit family cut a wall?

Open the Revit family with unattached voids and click Create tab Properties panel Family Category and Parameters. In the Family Category and Parameters dialog, select Cut With Voids when Loaded and click OK. Load the family into the project and place it. Click Modify tab Geometry panel Cut drop-down (Cut Geometry).

How do you cut a void wall in Revit?

Solution:

1. Edit the in place wall.
2. Create a new void extrusion that will define the opening.
3. Use the “Cut” tool and select the void geometry.
4. Finish the solid edition.

How do you cut a Geometry wall in Revit?

On the Modify ribbon, in the Geometry panel, click Cut Geometry. Revit prompts you to select the geometry to be cut. Click to select the wall. Then Revit prompts you to select the void geometry to cut.

How do you make a void family?

Create a Void Family with an Elliptic Profile

1. Create a new family using the Metric Generic Model face based. …
2. Select the 3D Front view.
3. Click Create tab Datum panel (Reference Plane).
4. Place a new horizontal reference plane in the middle of the slab extrusion:
5. Select the new reference plane.
6. In the Properties palette:

How do you make a void family in Revit?

Create a Void Form

1. On the Create tab Draw panel, select one of the drawing tools.
2. Click in the drawing area, and draw a closed loop that intersects solid geometry.
3. Select the closed loop.
4. Click Modify | Lines tab Form panel Create Form drop-down (Void Form).

How do you cut in Revit?

Load the family into the project and place it. Click Modify tab Geometry panel Cut drop-down (Cut Geometry). Select the object to be cut. Select the instance with which to cut.

How do I make a wall extrusion in Revit?

Create an Extrusion

1. In the Family Editor, on the Create tab Forms panel, do one of the following: …
2. Use the sketching tools to sketch the extrusion profile: …
3. On the Properties palette, specify the extrusion properties: …
4. Click Modify | Create Extrusion tab Mode panel (Finish Edit Mode). …
5. To view the extrusion, open a 3D view.

How do you create a sphere family in Revit?

The trick is you have to draw half semi-circle and a line. Select both line and semi-circle and create form. You will get sphere as a result.