How do you extrude a drawing in Solidworks?

How do you extrusion in Solidworks?

Click Convert to Extrusion (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears.

How do you extrude a sketch in an assembly in Solidworks?

Creating Extruded or Revolved Cuts as Assembly Features

  1. Open a sketch on a face or plane, and sketch a profile of the cut. …
  2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
  3. Set the options as needed in the Extrude or Revolve PropertyManager.

Can you extrude a 3D sketch solidworks?

You can create extruded surfaces from models that include 2D or 3D faces and knit the extruded surfaces to surrounding features. Click Insert > Surface > Extrude.

Can you extrude an open sketch?

Extrude Cut – Thin Feature



Thin features often use open sketches but can also use closed sketches. The thin features option gives the sketch a cut thickness and an extrusion depth as seen below in figure 1.

IT IS INTERESTING:  Frequent question: Is FreeCAD better than Tinkercad?

Can you extrude an open sketch solidworks?

Allows you to use a partial sketch to create extrude features from open or closed contours. Select sketch contours and model edges in the graphics area.

How can you extrude a sketch equally in both directions from the sketch?

To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.

What is extruded boss in Solidworks?

The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face. Figure 3: Selecting a Plane. Using the 2D sketch or plane to create a 3D model, the Boss-Extrude feature button will prompt you to set parameters in the menu shown in Figure 4.

Can you extrude cut in assembly?

You can create extruded and revolved cut features in assemblies. To create an assembly feature cut: Open a sketch on a face or plane, and sketch a profile of the cut.

How do you extrude Assembly in Inventor?

Click 3D Model tab Create panel Extrude . If there is only one profile in the sketch, it is selected automatically. Otherwise, select a sketch profile. Select the face, work plane, or surface from which to start the extrusion.

How do you cut a 3D sketch in SolidWorks?

To trim a 3D sketch:

  1. Start the 3D sketch on a 2D plane.
  2. Then do either of the following: Right-click and select 3D sketch on a plane. Double-click a plane or sketch entity. You can use any of the following trim options: Power trim. Corner. Trim away inside. Trim away outside. Trim to closest.
IT IS INTERESTING:  Are there layers in SOLIDWORKS?
Special Project