How do you extend a roof in Revit?

How do you expand a surface in Revit?

Extend a surface body

1. Click Design > Surface > Modify > Extend . …
2. Select the edges on the surface body to extend.
3. On the Feature tab in the Extend dialog, select the Extend Type, and adjust its associated settings: …
4. Drag the Distance manipulator handle to extend the surface, or specify an exact value in the dialog.

How do you do overhangs in Revit?

Tip: When using Pick Walls, you can specify the overhang before you sketch the roof. On the Options Bar, select Extend to wall core if you want the overhang to be measured from the core of the wall, and then specify a value for Overhang. Sketch, or pick, a closed loop for the roof. Specify slope defining lines.

How do you manipulate roofs in Revit?

Edit the roof sketch



Select the roof, and click Modify | Roofs tab Mode panel (Edit Footprint) or (Edit Profile). Make necessary changes. If you want to change the position of the roof, use the Properties palette to edit the Base Level and Offset properties to change the position of the reference plane.

How do you change the slope of a roof in Revit?

Select the roof, and click Modify | Roofs tab Mode panel (Edit Footprint) or (Edit Profile). Make necessary changes. If you want to change the position of the roof, use the Properties palette to edit the Base Level and Offset properties to change the position of the reference plane.

How do I extend my surface?

You can extend a surface by selecting an edge, multiple edges, or a face. To extend a surface: Click Extended Surface (Surfaces toolbar) or Insert > Surface > Extend.

How do you extend surface boundaries in Civil 3d?

To Extend a Surface

1. Click Surface tab > Edit Panel > Surface Extend. Find. …
2. Select one or more surface edges and press Enter.
3. Enter m (Modes) and specify the general shape of the extension: …
4. Specify whether the surface is merged or appended: …
5. Enter the distance of the extension and press Enter.

What options are available when using Extend Surface in Fusion 360?

Use the following options to set what happens when you select Surfaces > Extend. Tangent adds new isoparms to the extended surface. Extrapolate rebuilds the surface according to the direction and distance specified, but without adding new isoparms. Sets the length of extension.

When modeling ceilings in Revit What are the two methods used?

Use the Ceiling tool to create a ceiling in a reflected ceiling plan view.

• Open a ceiling plan view.
• Click Architecture tab Build panel (Ceiling).
• In the Type Selector, select a ceiling type.
• Place a ceiling using one of the following methods: Use walls as ceiling boundaries.