How do you draw a boundary line in Revit?

How do you create a property line in Revit?

Add property lines by sketching in the site plan or entering survey data directly into the project.



Create Property Lines

  1. In the Create Property Line dialog, select Create by sketching.
  2. Click (Pick Lines) or other sketch tools to sketch lines.
  3. Sketch the property lines. Lines should form a closed loop.

Where is property line in Revit?

Add property lines by sketching in the site plan or entering survey data directly into the project. Open a site plan view. Click Massing & Site tab Modify Site panel (Property Line).

How do I make property lines thicker in Revit?

To edit the linetype of property lines in Revit. Navigate to Manage Tab > Settings Toolset > Object Styles and finally, it is found under the Site category. Here you can change the thickness of the line and also the colour.

What is property line Revit?

Property Lines. To create property lines, you can use the sketching tools in Revit Architecture or enter survey data directly into the project. Revit Architecture aligns the survey data with True North.

How do you read property line bearings?

A direction that is expressed as a standard bearing is also based on a 360 degree circle but uses different points of reference. A bearing of N 60 degrees east means the direction is 60 degrees to the east of north. Likewise a bearing of S 15 degrees east means the direction is 15 degrees to the east of due south.

IT IS INTERESTING:  How often do architects work?

How do you add bearings in Revit?

Revit aligns the survey data with True North.

  1. In the Create Property Lines dialog, select Create by entering distances and bearings.
  2. In the Property Lines dialog, click Insert, and add the distances and bearings from your survey data.
  3. (Optional) Describe a property line as an arc. …
  4. Insert additional lines as needed.

How do you change project north in Revit?

Click Manage tab Project Location panel Position drop-down (Rotate True North). Specify the direction of True North using one of the following methods: On the Options Bar, for Angle from Project to True North, enter a value to set the angle of rotation.

Special Project