How do you dimension the radius of a circle in Solidworks?

How do you add a radius dimension in Solidworks?

To change the placement of circular dimensions:

1. Right-click the dimension.
2. In the Dimension PropertyManager, select the Leaders tab.
3. Under Witness/Leader Display, select a placement option. For example: Radius. Diameter. You can also right click the dimension and select Display Options.

How do you dimension a radius?

Create a Radius or Diameter Dimension

1. Click Annotate tab Dimensions panel Dimension. …
2. Select an arc or a circle.
3. At the prompt, enter r (Radius) or enter d (Diameter).
4. Before specifying the dimension line location, you can edit or rotate the text.
5. Click to place the dimension line.

How do you draw a diameter dimension in Solidworks drawing?

How to turn a radius dimension into a diameter (TLDR version)

1. Select a dimension (in drawing, part or assembly)
2. Look in the properties menu on the left.
3. Click the Leaders tab.
4. Click one of the two diameter buttons.

How do you use smart dimension?

To add a dimension to a sketch or drawing:

1. Click Smart Dimension. on the Dimensions/Relations toolbar, or click Tools > Dimensions > Smart. …
2. Select the items to dimension, as shown in the table below. You can undo previous selections by pressing Esc. …
3. Click to place the dimension. To dimension the…

How do I rotate a dimension in Solidworks?

You can change a dimension in a part, sketch, assembly, or drawing in the Modify dialog box. To change a dimension: Double-click a dimension. The Modify dialog box appears.

How do you change a smart dimension from diameter to radius?

When you’re sketching, if you smart-dimension a circle, it’s always in diameter and if you want to do it in radius, you have to change it in Dimension Properties>Leaders>Witnesses/Leader Display, and there, change it to radius.

What is a diameter dimension?

diameter dimension. A dimension that measures the diameter of a circle.

What is the unit for radius?

One radian is defined as the angle subtended from the center of a circle which intercepts an arc equal in length to the radius of the circle.

How do you set a radius on a drawing?

Creating Radius Dimensions

1. Click Dimension > Radius (or type RadiusDimension).
2. In the graphics area: Select an Arc or Circle. Specify the location of the dimension line or specify an option: Angle, Note, or Text: See Editing and Formatting Dimension Text.

How do I set dimensions in SOLIDWORKS?

To configure a dimension:

1. Select a feature, sketch, or mate in the FeatureManager design tree to make its dimensions visible in the graphics area.
2. In the graphics area, right-click a dimension and click Configure Dimension .
3. In the Modify Configurations dialog box, you can: Create new configurations.

How do you write dimensions in SOLIDWORKS?

Start drawing a sketch; Use click-move-click approach to draw the sketch entity. Enter the required dimension in the highlighted box, then press Enter. If more dimension is needed (such as drawing a rectangle) enter dimension and press Enter until the sketch is done.

How do I create a dimension in SOLIDWORKS?

To fully define a sketch:

1. Edit a sketch.
2. Click Fully Define Sketch. (Dimensions/Relations toolbar) or Tools > Dimensions > Fully Define Sketch.
3. Set the options for relations and dimensions in the Fully Define Sketch PropertyManager.
4. Click .