How do you dimension a box in AutoCAD?

How do you dimension a rectangle in Autocad?

Rectangle with increased width

1. Select the rectangle command from the ribbon panel. …
2. Type W or Width and press Enter.
3. Specify the line width for the rectangle. …
4. Press Enter.
5. Specify the first corner point of the rectangle on the viewport.
6. Specify the length and breadth of the rectangle in the form of @length, width.

How do you dimension an object in Autocad?

To create a Diameter dimension, click object 1 then, click point 2 to locate the dimension line. Command line: To start the Diameter Dimension tool from the command line, type “DIMDIA” and press [Enter].

How do you dimension an area in Autocad?

In order to find the area of rectangle or circle from the image above type AREA on the command line and press enter. Now command line will show a prompt with many options as shown in the image below. Select Object from this prompt and click on the boundary of Rectangle or Circle for which you want to find the area.

How do I fill a rectangle in AutoCAD?

To Hatch or Fill Objects or Areas

1. Click Home tab Draw panel Hatch. …
2. On the Properties panel Hatch Type list, select the type of hatch you want to use.
3. On the Pattern panel, click a hatch pattern or fill.
4. On the Boundaries panel, specify the how the pattern boundary is selected: …
5. Click an area or object to be hatched.

What does Ltscale 1 represent in AutoCAD?

The LTSCALE system variable is used to control the global linetype scale factor in the drawing. Changing this scale factor, the appearance of linetypes in the drawing also changes. For example, an LTSCALE setting of 1 means that the dash length specified in the linetype definition is read directly as drawing units.

How do you do dimensions?

All box dimensions are written as length x width x height. For example, 14″ x 11″ x 4″ means 14″ (L) x 11″ (W) x 4″ (H)”.

What units is area in AutoCAD?

By default, AutoCAD will show the area in the standard drawing units, in this example millimetres. However, whilst in construction, lengths might be needed to display as millimetres, areas tend to be reckoned in square metres.

How do you set a work area in AutoCAD?

Save and Set a Workspace Current

1. In AutoCAD, on the ribbon, click View tab > Palettes panel > Tool Palettes. …
2. Reposition the Tool Palettes window on-screen based on your preference of location.
3. In AutoCAD, on the status bar, click Workspace Switching. …
4. On the menu, choose Save Current As.

How do I hatch an area in AutoCAD?

Hatch an Area

1. Click Home tab > Draw panel > Hatch. …
2. On the Properties panel Hatch Type list, select the type of hatch that you want to use. …
3. On the Pattern panel, select a hatch pattern, such as ANSI31.
4. On the Boundaries panel, click Pick Points. …
5. Click inside the circle, rectangle, and the triangle.