How do you delete a section view in Solidworks?

How do you remove a section view in Solidworks?

Right-click inside the view boundary. Select Alignment > Break Alignment, or click Tools > Align Drawing View > Break Alignment. To break a view’s alignment while placing the view, press Ctrl as you place the view.

How do I remove section view?

Creating Removed Section Views

1. In a drawing, select a view.
2. Click Removed Section (View Layout CommandManager tab or Drawing toolbar).
3. In the PropertyManager, for Edge and Opposed Edge, select two edges from the same drawing view. …
4. Select a cutting line placement method: …
5. Move the pointer and click to place the view.

What is removed section in drawing?

So, what is it? The removed section view is a zero-thickness slice through the model showing only cut edges and hatching perpendicular to the cutting line. That’s different than the traditional section view, which is projected parallel to the cutting line.

How do you cut a section in Solidworks?

To create a section view manually:

1. Click Section View. (Drawing toolbar), or Insert > Drawing View > Section. …
2. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager.
3. Sketch a section line. …
4. Click to place the view.

What is a partial section view?

Partial section. Creates a section view that is limited by the length of the section line if the line does not span the entire view. Slice section. Shows only the faces cut by the section line.

How do you delete a section view in Civil 3d?

The best way to delete section view groups is by right-clicking the group in Prospector and selecting Delete, as shown in the first image in this sidebar.

What is removed sectioning?

A section removed from its normal projected position in the standard arrangement of views is called a “removed” section. Such sections are labeled SECTION A-A, SECTION B-B, etc., corresponding to the letter designation at the ends of the cutting plane line.

What is offset section?

What is an offset section? An offset section is produced by bending the cutting plane to show features that don’t lie in the same plane.

How do I hide section lines in SolidWorks?

To hide the cutting line in the parent view, right-click on either the cutting line or the section view and click Hide Section Line. To show a hidden cutting line, right-click on the section view and click Show Section Line.

What is a section view?

What is a section view? A sectional view or a section looks inside an object. Sections are used to clarify the interior construction of a part that cannot be clearly described by hidden lines in exterior views.

What is a revolved section view a revolved section view?

A revolved view is a cross section of an existing view, revolved 90 degrees around a cutting plane projection. You can use a cross section created in the 3D model as the cutting plane, or you can create one on the fly while placing the view.

How do you move a section view in Solidworks?

Applying SOLIDWORKS Drawing Move View



Click on the view with the left-mouse button and keep the button pressed. Drag the view and hover over the name of the sheet to which it is being moved.