How do you cut a plan view in Revit?

How do you edit a plan view in Revit?

Modify the View Range

1. Open a plan view.
2. On the Properties palette, locate the View Range parameter, and click Edit. Alternatively, enter VR on the keyboard.
3. In the View Range dialog, modify view range properties as necessary. …
4. Click Apply to view changes.

What is the cut plane in Revit view range?

The cut plane is a plane that determines the height at which certain elements in the view are shown as cut. These 3 planes define the primary range of the view range. View depth is an additional plane beyond the primary range. Change the view depth to show elements below the bottom clip plane.

How do you change the cut plane of plan in Revit?

Answer

1. Open a plan view.
2. In the Create panel on the View ribbon, expand the Plan Views split button and click Plan Region.
3. Sketch a closed loop using lines, rectangles, or polygons.
4. In the Properties palette, click Edit.
5. In the View Range dialog box, specify the primary range and view depth for the plan region.

How do you split a section view in Revit?

How to Create Split Sections

1. create a normal section line as usual.
2. Select the section line.
3. In the ribbon bar under the modify tab click “Split Segment”
4. Click on the section line where you want to create the split.
5. You can now adjust the location on the new segment.

How do you cut a section line in Revit?

Break a Section Line

1. Click the break control ( ) and adjust the length of the section line segments.
2. To rejoin the section line, click the break control again. Note: A break in a section line is view-specific. It affects the display of the section only in the view where the break was made.

How do I change the view range in detail view Revit?

You should be able to go to view properties within that view and edit the view range. or you can rightclick on the outline from the main plan and then go to element properties and edit the view range.

How do you change a cut line in Revit?

Open a plan view. Click View tab Graphics panel (Visibility/Graphics). Under Override Host Layers, select Cut Line Styles, and click Edit. In the Host Layer Line Styles dialog, assign line weights, line colors, and line patterns to host layers, as desired.

How do you use plan regions in Revit?

Create a Plan Region

1. Open a plan view.
2. Click View tab Create panel Plan Views drop-down (Plan Region).
3. Sketch a closed loop using lines, rectangles, or polygons.
4. On the Properties palette, for View Range, click Edit.
5. In the View Range dialog, specify the primary range and view depth.

What is the difference between floor plan and ceiling plan?

Reflected ceiling plans vs floor plans



In a floor plan, the imagined viewer is somewhere between the floor and ceiling of a room and looking down (approximately 1200mm / 4ft above). In a reflected ceiling plan, the imagined viewer is above the ceiling and looking through it into a mirrored surface below.

What is workset in Revit?

A workset is a collection of elements in a workshared project. You can create worksets based on functional areas, such as the following: For architecture and structural engineering: interior, exterior, and site. For systems: HVAC, electrical, or plumbing.

What is visibility graphics in Revit?

The visibility and graphics settings of a view define whether elements and categories are visible in the view and their graphical appearance (color, lineweight, and linestyle). The Visibility/Graphics Overrides dialog lists all categories in the model. Some examples of categories are furniture, doors, and window tags.