How do you create a subassembly in Solidworks?

How do you create a subassembly?

To create a subassembly from a polyline

  1. Create the desired polyline shape in the drawing.
  2. Click Home tab Create Design panel Create Subassembly From Polyline Find.
  3. Click the polyline object in the drawing and press Enter.
  4. In the Create Assembly dialog box, for Name, enter a name for the subassembly.

What is a sub assembly in Solidworks?

When an assembly is a component of another assembly, it is referred to as a subassembly. You can nest subassemblies in multiple levels, to reflect the hierarchy of your design.

What is the difference between assembly and subassembly?

1. A sub-assembly is just an assembly that is placed inside another assembly. 2. It all depends what you want to achieve – a fully accurate design model of a USB connector probably would be an assembly (and hence used as a sub-assembly in your larger design).

How do you save subassemblies in Solidworks?

With your top level assembly open, left click on a sub-assembly that you would like to save as a part and chose Open Subassembly. 2. With the sub-assembly open click File, Save as. Chose the option to Save as when prompted.

IT IS INTERESTING:  How do I enter project information in Revit?

How do you make a subassembly flexible in Solidworks?

To make a subassembly flexible: Click a subassembly in the FeatureManager design tree and select Component Properties . In the dialog box, under Solve as, select Flexible, then click OK.

How do you dissolve a subassembly in Solidworks?

To dissolve a subassembly from the graphics area, right-click the subassembly and click Select Subassembly. Then right-click in the graphics area and click Dissolve Subassembly.

Can you add an assembly to an assembly in Solidworks?

You can assemble the SolidWorks part or assembly as a non-Creo model in the existing assembly by default. You must explicitly select Import to import and assemble the part or assembly in the existing assembly.

What is sub assembly example?

aerospace industry

Assembly of aerospace vehicles at the prime contractor or systems integrator begins with the accumulation of subassemblies. An example of a typical subassembly for a transport aircraft is the rear fuselage section, which is itself composed of several segments.

What is a subassembly drawing?

An assembly drawing shows how each part of a design is put together. If the design depicted is only part of the total assembly, it is referred to as a subassembly.

What is Autodesk subassembly composer?

Autodesk® Subassembly Composer for Autodesk® Civil 3D® provides an interface for composing and modifying complex subassemblies, without a need for programming. Subassembly developers can compose complex subassemblies visually and can simulate how the subassembly behaves with different target values and conditions.

How do I create custom subassemblies in Civil 3D?

Simply select the modify origin command from the custom ribbon and select the point you created earlier to use as your modified origin. Then “Add Shape” to the subassembly. Select the subassembly and click “Add Shape” from the custom ribbon. Once complete, add this new subassembly to your corridor.

IT IS INTERESTING:  Question: How do you kick someone out of Revit?

How does sub work in assembly?

The SUB instruction subtracts the value of Operand2 or imm12 from the value in Rn . In certain circumstances, the assembler can substitute one instruction for another.

How do I save an assembly as a part File?

Save Assembly as Part PropertyManager

  1. In an assembly, click File > Save As.
  2. Select Part (*. prt;*. sldprt) for the file type.
  3. Select Include specified components.
  4. Select Override defaults.
  5. Click Save.

How do you save a part in Solidworks?

In an assembly, in the graphics area or FeatureManager design tree, right-click a component or Ctrl + select multiple components and click Make Independent . In the dialog box, click OK when asked to save the component with a new name. In the Save As dialog box, type a name and click Save.

How do you save a Solidworks File without references?

“SOLIDWORKS Save as Copy” saves your already existing part/assembly/drawing, with a new name, but breaks all references to the original part. Essentially making a disassociated file that can be opened and modified with no connection to existing drawings or assemblies that contain the ‘original’ part.

Special Project