How do you create a hidden line in Solidworks?

How do you hide a line in Solidworks drawing?

To hide or show edges in a drawing:

1. Click Hide/Show Edges. …
2. Select the edges to hide (you can select edges individually, or use box selection), then click . …
3. To show edges, click Hide/Show Edges. …
4. Select the hidden edges highlighted in orange, (you can select edges individually, or use box selection), then click .

How do you make a hidden line?

Hide Lines in Layout Viewports

1. Select the layout viewport in which you want to hide the lines.
2. Click View tab Palettes panel Properties palette.
3. On the Properties palette, under Misc, in the Shade Plot field, select Legacy Hidden.

How do you show hidden lines in Solidworks 2020?

To control how hidden edges are displayed:

1. Click Tools > Options > System Options > Display.
2. Select Solid or Dashed for Hidden edges displayed as.
3. Click OK.

How do you make a phantom line in Solidworks?

First go to sketch, draw your line(s). Now right click in the grey part of the Command Manager and add the “Line Format” toolbar. Pick the line(s) you would like to make Phantom. Click the “Line Styles” Icon in the Line Format Toolbar and choose phantom.

How do I show a construction line in Solidworks?

Click Construction Geometry. on the Sketch toolbar. Click Tools > Sketch Tools > Construction Geometry. Select the For construction check box in the PropertyManager.

How do you hide a tangent line in Solidworks?

Other options for tangent edge display are in the Hide/Show Edges PropertyManager. You can control tangent edge display in the following ways: Default – to set the display for all new drawing views, click Options. > Display Style, and choose one of the options under Tangent edges in new views.

What is the symbol of hidden line?

Hidden lines indicate invisible edges or contours. Hidden lines consist of short dashes evenly spaced and are frequently referred to as dash lines.

What is the difference between visible line and hidden line?

A visible line, or object line is a thick continuous line, used to outline the visible edges or contours of an object. A hidden line, also known as a hidden object line is a medium weight line, made of short dashes about 1/8” long with 1/16”gaps, to show edges, surfaces and corners which cannot be seen.

What is a hidden line?

Hidden lines in a drawing represent the edges where surfaces meet but are not directly visible. Hidden lines are omitted from pictorial drawings unless they are needed to make the drawing clear.

Where is the line format toolbar in Solidworks?

If you’re going to be making a lot of changes, it may be convenient to enable the Line Format toolbar by clicking on View > Toolbars > Line Format. You’ll not only have access to the tools mentioned above but layers as well.

How do I show edges in Solidworks?

To hide or show edges in a drawing:

1. Click Hide/Show Edges. …
2. Select the edges to hide (you can select edges individually, or use box selection), then click . …
3. To show edges, click Hide/Show Edges. …
4. Select the hidden edges highlighted in orange, (you can select edges individually, or use box selection), then click .

How do I delete hidden lines in Solidworks?

Hidden Lines Removed

1. Click Display Style > Hidden Lines Removed (Heads-up View toolbar).
2. Click Hidden Lines Removed (View toolbar).
3. Click View > Display > Hidden Lines Removed.

How do I edit lines in Solidworks?

Right-click on an existing section view or its cutting line and click Edit Cutting Line. For some complex section views created with SOLIDWORKS 2013, you must select an insertion point before you can modify them.

What is a phantom line?

Lines that are made visible as dots or dashes to reveal the edges of objects currently hidden from view.

How do I change the section line style in Solidworks?

To modify a section line before creating the view:

1. Double-click a drawing view and sketch a line (or multiple lines for an aligned section view) in the view. …
2. With the line or lines selected, click Insert > Make Section Line.
3. Select the section line. …
4. Make any changes in the PropertyManager.
5. Do one of the following: