How do you change the vertical scale in Civil 3d?

How do I change the vertical scale in AutoCAD?

AutoCAD – Use A Different Scale For X, Y & Z

1. Press Ctrl + 1 if the AutoCAD PROPERTIES palette is not showing, and select the newly created block.
2. In the Geometry section of the block properties, change the fields Scale X, Scale Y and Scale Z to the values you require:

How do you change vertical exaggeration in Civil 3d?

select the profile view in question then rt click and ‘edit profile view style…’; next, click the graph tab where you will find a box marked ‘verticle exaggeration’; finally, change at will.

How do you edit a vertical curve in Civil 3d?

To add a fixed vertical curve with three points

1. Click the profile. Click Profile tab Modify Profile panel Geometry Editor Find.
2. On the Profile Layout Tools toolbar, click Fixed Vertical Curve (Three Points).
3. Specify the start point.
4. Specify the second point.
5. Specify the end point.

How do I change the scale of one direction in AutoCAD?

You need to select the objects you want to scale and create a block out of them. Be sure to create the block with the “scale uniformly” option unchecked. Then, this block can be scaled in one direction by modifying the X or Y scale. Once you have the geometry scaled as you wanted you can explode the block.

How do you scale a surface in Civil 3d?

Embed This Screencast

1. Create a copy of the original surface.
2. Create a block of the copied surface.
3. Scale the block from base point 0,0.
4. From the properties of the block, change the “Scale Z” property to 1.
5. Explode the block (it will be a surface again)

How do I change the annotation scale in Civil 3d?

Annotative Scale is under the Misc section, Select and right click any Annotative object and choose Properties. The Properties palette for the object you selected will be shown. Click ADD to add additional scales manually or click DELETE to remove scales from the list.

How do you scale in CAD?

How to Change Scale in AutoCAD using the Scale Command

1. How to scale down in AutoCAD – Window select the object(s) in AutoCAD, type SCALE, and then specify a number between 0 and 1. Hit Enter. …
2. How to scale up in AutoCAD – Window select the object(s), type SCALE, and then specify a number larger than 1. Hit Enter.

How do I change the horizontal scale of profile view in Civil 3d?

The horizontal scale must be changed in the Drawing Settings dialog box. Specifies by how much the elevation values increase in the profile view for greater visibility. Enter either 1 for no increase in scale or a larger number to increase the scale.

How do you scale profile view in Civil 3d?

Select your profile view ==> right-click for the contextmenu ==> edit profile view style ==> within this new dialog go to the second tab and there you find on the right side the exaggeration value to modify.

What is vertical exaggeration in profile drawing?

Vertical exaggeration refers to the common practice in topographic profiles of different horizontal and vertical scales. It is expressed as a number, the ratio of the vertical to horizontal scale, and is almost always greater than 1.

How do you label vertical curves in Civil 3d?

Open the tutorial drawing “Profile-3A. dwg” and select a vertical curve label > right click > select edit labels. Reviewing the Labels here should provide some insight as there are “Geometry Points” included in profile labels.

How do you find vertical curve elevation?

The elevation of the curve at distance X from the BVC is given (on a crest curve) by: BVC + g1x – ax2 (the signs would be reversed in a sag curve).