How do you change the spot elevation in Revit?

How do you change the spot slope in Revit?

Add a Spot Slope Dimension

1. Click Annotate tab Dimension panel (Spot Slope).
2. In the Type Selector, select the type of spot slope to place.
3. (Optional) Change the following on the Options Bar: …
4. Click the edge or slope where you will place the spot slope.
5. Click to place the spot slope, either above or below the slope.

How do you add a spot elevation symbol in Revit?

Change the Arrowhead for Spot Elevations

1. Click Manage tab Settings panel Additional Settings drop-down (Arrowheads).
2. In the Type Properties dialog, for Type, select Filled Elevation Target 3/16″.
3. Under Graphics, for Arrow Style, select Elevation Target.
4. If desired, select Fill Tick. …
5. Click OK.
6. Place a spot elevation.

How do you use spot elevation?

Click Annotate tab Dimension panel (Spot Elevation).

…

Add a Spot Elevation Dimension

1. Select or clear Leader. …
2. If Leader is selected, optionally select Shoulder to add a bend to the spot elevation leader. …
3. If you are placing a relative spot elevation, select a level for Relative Base.

How do you read spot elevation?

To find an elevation, simply set the rod foot at any location on the job within the range of your laser or optical instrument. Run the detector and / or front rod section up or down until you pick up the “on grade” signal from your detector. Read the number opposite the pointer. That number is your true elevation.

How do you change the point of slope?

Add a Spot Slope Dimension

1. Click Annotate tab Dimension panel (Spot Slope).
2. In the Type Selector, select the type of spot slope to place.
3. (Optional) Change the following on the Options Bar: …
4. Click the edge or slope where you will place the spot slope.
5. Click to place the spot slope, either above or below the slope.

How do you change relative base to spot elevation?

Change the Reference for a Spot Elevation

1. Add a spot elevation to a drawing, and then select it.
2. On the Properties palette, click (Edit Type).
3. Under Text, specify a value for Elevation Origin.
4. If you selected Relative, click OK and, on the Properties palette, select the value for Relative Base.

How do you set a place elevation in Autocad?

To add surface spot elevation labels

1. Click Annotate tab Labels & Tables panel Add Labels menu Surface Spot Elevation .
2. Select the point to label.