How do you change the density of a mesh in Solidworks?

How do I change the mesh quality in Solidworks?

Meshing options are essential factors in determining the quality of the mesh and the results. Results based on different mesh settings must converge if an adequately small element size is used.
…
Setting the Meshing Options

1. Click Simulation > Options > Default Options > Mesh.
2. Specify the desired settings.
3. Click OK.

How do you find mesh density in Solidworks?

To modify and check the mesh density in the Simulation Setup PropertyManager:

1. Click Advanced and hover over the slider to view the current mesh density.
2. Drag the slider from Course to Fine to modify the mesh density.
3. Click Check Mesh to make certain that the new mesh density does not produce errors.

What is mesh density?

Mesh density is the number of elements per unit area in a mesh. Higher density meshes usually produce more accurate analysis results, but take longer to analyze. You can mesh different areas with different densities.

How do I reduce mesh in Solidworks?

To simplify the file:

1. Set a value for Reduction amount (%) or for Target mesh size or point cloud size. …
2. To simplify only a part of a mesh-based model, under Local Simplification, select a tool, select the area to simplify, and move the slider to adjust the simplification.
3. Click .

How do you determine whether a mesh is of good quality?

What Makes a Good Quality Mesh?

1. Make certain the polygons accurately reflect the work area. …
2. Vertices along the arcs determines the size and spacing of elements in the mesh. …
3. Keep individual arcs smooth and rounded to avoid interior acute angles.

How do I change the mesh color in Solidworks?

Mesh colors

Sets the color for plotting the bottom faces of shell elements. Shell bottom face color set to red – part color is yellow. Shell bottom face color set to purple – part color is yellow. To change a color, select Boundary color or Shell bottom face color, click Edit, then choose a color, and click OK.

What is global mesh size?

Global Mesh Size sets a mesh size that will be used as a default value in the process of overall meshing. Global Size is applied only as a default value.

What is mesh tolerance?

Hi, what is the meaning of mesh tolerance parameter ? It is usually defined like this: if the distance between two nodes is smaller than tolerance, the nodes are merged. Usually you can be your ally because by increasing tolerance you can simplify your model by closing small gaps.

What is global mesh?

Global mesh controls include sizing functions, inflation, smoothing, defeaturing, parameter inputs, assembly meshing inputs, etc. Minimal inputs. Automatically calculates global element sizes based on the smallest geometric entity. Smart defaults are chosen based on physics preference.

How do you increase your mesh density?

To increase mesh density around that area, you can give right click select Mesh>Sizing and choose the edge then give the element size on it. you can use drop down menu from Mesh>Sizing>Type and give sphere of influence, it creates a sphere and gives element sizing only in that sphere region.

How do you determine the density of mesh?

Choosing a suitable mesh size

1. Perform chosen analysis for several different mesh sizes.
2. Notice where high deformations or high stresses occur, perhaps it is worth to refine mesh in those regions.
3. Collect data from analysis of each mesh: outcome, number of nodes in the model, computing time.

What effect does mesh density have?

Effects of Mesh Density on Finite Element Analysis 2013-01-1375. In finite element analysis, mesh density is a critical issue which closely relates to the accuracy of the finite element models while directly determines their complexity level.

How do you reduce facet of STL?

We can use the ‘Reduce’ tool in the ‘facet’ tab to decrease the the total number of facets in the selected area. Note that it’s not going to merge them into a single face. From the Facet tab, in the Adjust group, select Reduce.

How do I reduce the size of a STL file in SolidWorks?

The command can be found in the Insert menu > Net > Reduce mesh object. Then select the file and choose the reduction as a percentage or by entering the target number of triangles. You can also reduce the triangles locally using the facets painter.

How do I reduce graphic triangles in SolidWorks?

To change image quality, click Tools > Options > Document Properties > Image Quality. In the Shaded and draft quality HLR/HLV resolution section, move the Low (faster) – High (slower) slider to change the image resolution. Components with high image quality have the slider set at 95% or greater.