How do you change plan cut height in Revit?

How do you change the cut plane in Revit?

Answer

1. Open a plan view.
2. In the Create panel on the View ribbon, expand the Plan Views split button and click Plan Region.
3. Sketch a closed loop using lines, rectangles, or polygons.
4. In the Properties palette, click Edit.
5. In the View Range dialog box, specify the primary range and view depth for the plan region.

Why can I see the level below in Revit?

Follow these steps: In plan view, click View menu > View Properties. Click the Edit button for the View Range parameter. Enter a value for both the Bottom Offset, under Primary Range, and the Level Offset, under View Depth, that is more than 4 feet from the floor or slab.

Why is my view range greyed out in Revit?

In your case you seem to have a view template assigned to your view. This (can) cause different settings to be grayed out because it is controlled by the view template. You can solve it by removing the view template from the view (set it to )or modify the view template.

What is Revit plan view?

The structural plan view is the default view when you start a new project using a structural template. … Revit provides for this variation with the View Direction type parameter for structural plans.

How do you increase view depth in Revit?

Modify the View Range

1. Open a plan view.
2. On the Properties palette, locate the View Range parameter, and click Edit. Alternatively, enter VR on the keyboard.
3. In the View Range dialog, modify view range properties as necessary. …
4. Click Apply to view changes.

Why is cut plane greyed out?

Hi, this is due to the origin of the plan view you’re in: any plan view is associated to a level, plan views could not exist without a level, but the contrary does. So when you define the cut plane you’re not allowed to change the reference level but only the distance between the ref. plane and the cut plane.

What is far clipping in Revit?

You can cut an elevation, section, or callout view at the far clip plane. You activate this feature using the Far Clipping parameter for the view. The far clip plane is defined with the Far Clip Offset parameter. … The Far Clipping parameter is available for elevation, section, and callout views.

Is there a Revit viewer?

To open and review models without an active license, you can run Revit in viewer mode. Revit Viewer is intended for reviewing models and printing views and sheets without the need for a software license or subscription.

How do I turn off underlay in Revit?

Define Halftone/Underlay Settings

1. Click Manage tab Settings panel Additional Settings drop-down (Halftone/Underlay).
2. In the Halftone/Underlay dialog, under Underlay, define the following settings: …
3. Under Halftone, for Brightness, enter a value or use the slider to specify a setting between Light and Dark. …
4. Click OK.

How do you show cut planes in Revit?

Cut a Plan View at a Clip Plane

1. In the Project Browser, select the plan view you want to cut by the back clip plane.
2. On the Properties palette, under Extents, find the Depth Clipping parameter. …
3. Click the button in the value column. …
4. In the Depth Clipping dialog, select an option and click OK.