How do you break a section view link in Solidworks?

How do you slice view in Solidworks?

To create a section view:

1. In a part or assembly document, click Section View. …
2. In the Section View PropertyManager, under Section Method, select one of the following: …
3. In the Section View PropertyManager, under Section Option, select how the section offset is calculated: …
4. Under Section 1, select a plane.

What is a broken-out section?

A broken-out section is part of an existing drawing view, that is used to remove material to a specified depth in order to expose inner details of a model. A closed profile, usually a spline, defines the broken-out section.

How do you break out a section in Solidworks?

To create a broken-out section:

1. Click Broken-out Section. (Drawing toolbar), or click Insert > Drawing View > Broken-out Section. …
2. Sketch a profile.
3. Set options in the Section View dialog box. …
4. Set options in the Broken-out Section PropertyManager. …
5. Click .

How do you cut a section in Solidworks?

To create a section view manually:

1. Click Section View. (Drawing toolbar), or Insert > Drawing View > Section. …
2. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager.
3. Sketch a section line. …
4. Click to place the view.

How do I edit a broken view in Solidworks?

Right-click the broken view, and select Un-Break View. The break lines remain in the view and you can delete them. To modify a broken view: To change the shape of the break lines, right-click a break line and select a style from the shortcut menu.

How do I shorten a section view in Solidworks?

Right-click on an existing section view or its cutting line and click Edit Cutting Line. For some complex section views created with SOLIDWORKS 2013, you must select an insertion point before you can modify them. On the Section view pop-up, click an offset.

How do you delete a broken section in Solidworks?

To delete or edit a broken-out section:

1. Right-click the broken-out section in the FeatureManager design tree and select one of the following.
2. Delete.
3. Edit Definition. Set options in the Broken-out Section PropertyManager , then click OK .
4. Edit Sketch. Select the sketch entity and edit it, then close the sketch.

What is a removed section view?

The removed section view is a zero-thickness slice through the model showing only cut edges and hatching perpendicular to the cutting line. That’s different than the traditional section view, which is projected parallel to the cutting line.

What is a partial section view?

Partial section. Creates a section view that is limited by the length of the section line if the line does not span the entire view. Slice section. Shows only the faces cut by the section line.

What is a full section view?

Full Section. ∎ In a full section, the cutting plane line. passes fully through the part. ∎ Normally a view is replaced with the full. section view.

How do you move a section view arrow in Solidworks?

When you create a view letter attached to a view arrow, such as an auxiliary view or projected view, you can move the view letter. This is similar to moving the view letter in a section view. To move a view arrow letter: Select the arrow and drag the letter.