How do I use section view in Catia?

How do you do a section view in Catia?

Creating a Section View

1. Click the Drawing window, and click the Offset Section View icon. from the Views toolbar (Sections subtoolbar).
2. Select the holes and points required for sketching the callout on the view. …
3. Double-click to end the cutting profile creation.

How do you do a section view?

A full section view is generated by running the cutting plane through the entire length of the object being sectioned. Click the view you want to use as the parent view. The start direction arrow appears at the cursor. Click in the drawing area to indicate the start point of the section line.

What is an offset section view?

An offset section view is generated by offsetting (bending) the cutting plane to show features that are not in a straight line.

What is offset section in drawing?

An offset section is a means of including in a single section several features of an object that are not in a straight line. To do this, the cutting plane line is bent, or “OFFSET” to pass through the features of the part.

How do you use section lines?

Lines used in section views.

1. Cutting Plane Line: Used to show where the object is being cut. ( …
2. Section Lines: Used to indicate where the cutting plane cuts the material. …
3. Rule 1: A section lined area is always completely bounded by a visible outline.
4. Rule 2: The section lines in all areas should be parallel.

How do I create a cross section in Catia?

To gain access to the Sectioning tool, CATIA users will need to add the Sectioning tool into their 3DCS workbench. With a model open, start the Sectioning tool. The Sectioning Definition will appear. In the Positioning tab, the user can specify the section plane direction in either X, Y, Z directions.

What is the difference between split and trim in Catia?

Split versus Trim



The main difference between these two commands is that Split is only cutting specific surfaces while Trim will cut all surfaces involved in the operation.

How do I cut an assembly in Catia?

Reusing Assembly Design Splits



In this case, you just need to select the existing assembly split, click the Assembly Split icon and then select a face. Only the Assembly Features Definition dialog box appears to let you determine the parts of interest.

How do you split lines in Catia?

Splitting Closed Surfaces by Two Connex Surfaces or Curves

1. Click Join . The Join Definition dialog box appears.
2. Select Split. 1 and Inverse. …
3. Clear Check connexity .
4. Click OK to create the joined surface.
5. Click Split . The Split Definition dialog box is displayed.
6. Select Surface. …
7. Click OK to split the closed surface.

How are section lines shown?

Rule 1: A section lined area is always completely bounded by a visible outline. Rule 2: The section lines in all areas should be parallel. Section lines shown in opposite directions indicate a different part. Rule 3: All the visible edges behind the cutting plane should be shown.

What are the 7 types of section views?

There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved sections, removed sections, offset sections, and assembly sections.

What are the different types of section views?

6 Types of sectional views

• Full sections. …
• Half sections or views. …
• Offset sections or views. …
• Broken out sections or broken views. …
• Revolving sections or view. …
• Removed sections.