How do I translate a sketch in Solidworks?

How do you translate a shape in SOLIDWORKS?

Click Move/Copy Bodies (Features toolbar) or Insert > Features > Move/Copy . Specify parameters to move, copy, or rotate bodies. Apply mates between bodies. Click Translate/Rotate or Constraints at the bottom of the PropertyManager (if necessary) to switch to the page you want.

How do you edit a derived sketch in SOLIDWORKS?

Select the sketch from which you want to derive a new sketch. Hold the Ctrl key and click the face on which you want to place the new sketch. Click Insert > Derived Sketch. The sketch appears on the plane of the selected face, and the status line indicates that you are editing the sketch.

How do I convert entities in SOLIDWORKS?

To convert an entity:

1. In an open sketch, click a model edge, loop, face, curve, external sketch contour, set of edges, or set of curves. You can also click an entity after clicking the Convert Entities. …
2. Click Convert Entities. …
3. In the PropertyManager, click Select chain to convert all contiguous sketch entities. …
4. Click .

How do you move a sketch from one plane to another in SOLIDWORKS?

The first and more straightforward way to move a sketch to a different face is to right-click on the sketch in the feature tree. From there, you can click the button to “edit sketch plane.” This will highlight the existing face, and all you need to do to move it is to select the new face.

How do you duplicate something in Solidworks?

To copy the feature to the part, hold CTRL , and select the Cut Feature in the FeatureManager Design Tree. While holding CTRL and the left mouse button, drag and drop the feature in the desired location.

How do you duplicate a file in Solidworks?

Select the parent file and click Tools > Copy Tree . A dialog box appears to let you specify how the copy is performed. Select whether the files should be copied to a folder or a compressed archive.

How can you correct an over defined sketch?

There are two common ways to fix over defining dimensions.

1. Delete the over defining dimension in the graphics area.
2. Right-click the over defining dimension in the graphics area and select Properties. …
3. When you add a dimension that over defines a sketch, the Make Dimension Driven dialog box appears.

How do you show the ribbon in Solidworks?

View Ribbon

1. Click View on the ribbon.
2. Right-click in a drawing view.
3. Use the slider bar at the bottom of the drawing.

What does the Convert Entities sketch tool do solidworks?

You can create one or more curves in a sketch by projecting an edge, loop, face, curve, or external sketch contour, set of edges, or set of sketch curves onto the sketch plane.

What is convert entities & where is used?

Convert Entities and Offset Entities are two powerful tools you can use when editing a sketch in SOLIDWORKS. Let’s begin with the Convert Entities tool. Whenever we need to make a sketch entity that matches other geometry of our model we can use the Convert Entities tool.

What does the Offset Entities sketch tool do?

Offset entities takes a copy of your existing geometry and copies it at an offset. Instead of recreating geometry, you can use this to quickly sketch based on model geometry. Offset entities is a great tool for enlarging or shrinking your sketch geometry.

How do you copy a sketch from one plane to another?

Note – Either Create a new sketch using one of the XYZ planes in the Origin or using a “Construction Plane” from the ‘Construct’ drop-down.

…

Solution:

1. Select wireframe on sketch by dragging a window over sketch items.
2. Then use Ctrl C (Copy).
3. Deselect items.
4. Select a new sketch plane for items to be pasted in.

How is a sketch different from a plane?

Answer. Answer: Sketches are layouts of an intended action particularly refers to drawings, that usually have fewer details and are not considered as final drafts. Plans on the other hand, are systematic layout of ideas in a step by step manner that indicates activities to be carried out in their order.

What command would you use to move a sketch onto a different plane?

In a part or assembly file, use Redefine to move a sketch to a different plane. To move a sketch to a planar face or work plane, in the browser, right-click the sketch, and click Redefine. You can use constraints and dimensions to position it, and modify its size.