How do I thread a hole in AutoCAD?

How do you annotate a thread in AutoCAD?

To Add Hole or Thread Notes to a Drawing View

1. On the ribbon, click Annotate tab Feature Notes panel Hole and Thread .
2. In the graphics window, click an edge or a circular edge to specify the hole. …
3. Move the cursor and click to place the note.
4. When you are finished placing hole or thread notes, right-click and select Done.

What is PCD in AutoCAD?

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes.

What is the command for drawing circle in AutoCAD?

To draw a circle with AutoCAD, enter the CIRCLE command and choose one of the following options: Center & Radius (CENRAD) — With this option, you first click where you want the center point of the circle to be, then move the pointing device to establish the perimeter of the circle.

How do you annotate a CAD drawing?

Click the Multileader tool in the Annotation panel or enter MLD in the Command window. Follow the prompts and options in the Command window. Feel free to experiment. After you create a multileader, select it and then modify it by clicking and moving its grips.

How do you draw annotations?

Annotated Drawings

1. Provide an explanation.
2. Use simple outline drawings.
3. Use a magnifier to show things too small to see.
4. Use labels, arrows, and a color key.
5. Add notes to explain important ideas.

How do you work out the pitch diameter of a circle?

How do you work out Pitch Circle Diameter? Measure the distance between two adjacent studs. Measure from the centre of the stud and mark down your measurement. This applies whether you have four, five, or six studs to measure between.

How do you draw PCD?

Identify the size of the rim or tyre size. (This helps to narrow down the likely PCD sizes) Measure the distance ‘S’ between two adjacent studs from the centre of each hole.

…

Pitch Circle Diameter – PCD Calculation Formula.

Which command is used to draw circle?

Answer: The circle command is used to draw a circle by specifying the center point and radius. Let’s understand by two examples. Type Circle or C on the command line and press Enter.