How do I import a point cloud into AutoCAD?

How do I export point cloud to AutoCAD?

To Export Point Cloud Data

1. Right click the point cloud or point cloud layer you want to export, then select Export Point Cloud. The Export Point Cloud dialog box appears.
2. Select the file type to which you want to export your point cloud data in the File of Type field.
3. Specify a file name and save location.
4. Click Save.

How do I import point cloud?

To import point cloud data

1. Click (Add File Data Source).
2. Click Point Cloud.
3. Navigate to the folder where files are stored and select the point cloud file. InfraWorks supports . LAS, . LAZ, RCS and RCP files. An RCS file is a single point cloud file that can incorporate multiple scan (LAS) files. …
4. Click Open.

How do I import a PTS file into AutoCAD?

PTS is Ascii data, therefore to import your PTS file you now need to select from the PointCloud Menu Import (Other Formats)->Import Point cloud ASCII . A window should open allowing you to select the input file, the name of the exported PCG and the file format.

How do I open a point cloud file?

Insert a Point Cloud File

1. Open the Revit project.
2. Click Insert tab Link panel (Point Cloud).
3. Specify the file or files to link, as follows: For Look in, navigate to the location of the file(s). …
4. For Positioning, select: …
5. Click Open. …
6. For raw format files, you are prompted to index the data:

Can AutoCAD open RCP files?

In actuality, AutoCAD only supports two file formats, namely . rcs & . rcp.

How do I import data from point cloud to Civil 3D?

The two-point cloud formats that can import directly in Civil 3D are: RCS and RCP. To Attach a point cloud in Civil 3D try the following (RCP/RCS): Click the Insert tab on the ribbon. In the Point Cloud panel, click Attach.

How do I import LAS files into Civil 3D 2020?

Click the [+ Select Files to Import] button. Select all the LAS/LAZ files applicable to the project, click OK. Click the [Import Files] button in the lower right. Wait while Recap imports the files into the project (thick rings are yet to be done, thin ones are finished).

How do I use point cloud in AutoCAD?

To Attach a Point Cloud to a Drawing

1. Click Insert tab > Point Cloud panel > Attach. …
2. In the Select Point Cloud File dialog box, find and select a scan (RCS) or reality capture project file (RCP) to attach. …
3. In the Attach Point Cloud dialog box, specify your preferences for insertion point, scale, and rotation.

How do I open a PTS file in ReCap?

That’s huge and might be the reason you’re not having any luck in ReCap. Try opening up that monster in >>>QGIS<<< or >>>CloudCompare<<<. If no luck there, then use >>>LAStools<<< to convert the PTS file to LAZ, after which you should be able to import into ReCap.

How do I convert XYZ to RCP?

To do so, follow these steps:

1. Launch ReCap Pro.
2. Select New project.
3. Import Point cloud.
4. Give the . RCP file a name and location.
5. Click Proceed.
6. Hit Select Files to import.
7. Navigate to the . XYZ files on the computer.
8. register / index / launch the project.

How does point cloud work?

A point cloud is a collection of many small data points. These points exist within three dimensions, with each one having X, Y and Z coordinates. Each point represents a portion of a surface within a certain area, such as an engineering work site. You can think of these points similarly to pixels within a picture.

What is RCP point cloud?

An . rcp format file is a project file that groups together multiple . rcs scan files. … rcs files. Note: You can use Autodesk ^® ReCap ™ to convert scan file data (raw format) to a point cloud format that can be viewed and edited in other products, such as Revit.