How do i create an imaginary line in autocad?

How do you create a linetype in AutoCAD?

Load a Linetype

1. Click Home tab Properties panel Linetype drop-down list. Find.
2. Click Other.
3. In the Linetype Manager dialog box, click Load.
4. In the Load or Reload Linetypes dialog box, use one of the following methods: Choose the linetypes to load. …
5. Click OK to close each dialog box.

How do I create a hidden line in AutoCAD 2020?

To Create a Hidden Line Projection

1. Open the tool palette that you want to use, and select a hidden line projection tool. …
2. In a 3D view select one or more objects that you want to use to create your hidden line projection, and press Enter.
3. Specify an insertion point in your current drawing for the 2D hidden line projection.

14 мая 2019 г.

How do I create a survey line in AutoCAD?

Start the . _LINE command and pick a starting point. If you have XY or Northing and Easting coordinates, you can enter them, otherwise just pick any point in the drawing. Then at the next prompt enter @107.65

How do you create a linetype?

To Create a Simple Linetype From the Command Prompt

1. At the Command prompt, enter -linetype.
2. Enter c and press Enter.
3. Enter a name for the linetype and press Enter. …
4. In the Create or Append Linetype File dialog box, select an existing LIN linetype file or enter a new file name in the File Name box. …
5. (Optional) Enter text that describes the new linetype and press Enter.

How do I create a linetype?

To create the linetype from the pattern, use the ‘Make linetype’ command from the ‘Tools’ panel of the ‘Express Tools’ tab of the ribbon. When asked to select a linetype file (*. lin), you can create a new one or select an existing one.

How do you draw hidden lines in engineering drawing?

Hidden lines in a drawing represent the edges where surfaces meet but are not directly visible. Hidden lines are omitted from pictorial drawings unless they are needed to make the drawing clear. Figure 3.46 shows a case in which hidden lines are needed because a projecting part cannot be clearly shown without them.

How do you hide something in AutoCAD?

You can temporarily hide objects in the drawing.

1. Select the objects that you want to hide.
2. Click tab General panel Isolate Objects drop-down Hide Objects.
3. Tip: You can also use the icon in the drawing window status to hide objects.

14 мая 2019 г.

What is a phantom line in AutoCAD?

Phantom lines: Phantom lines are used to indicate imaginary features. For example, they are used to indicate the alternate positions of moving parts, and adjacent positions of related parts. The line type is long dash – short dash – short dash and the line weight is usually thin (0.3 mm).

How do I draw a line with coordinates in Autocad?

Using Specific Coordinates

1. Click Home tab > Draw panel > Line. Find.
2. Type the coordinate value for the first point by typing the X value, a comma, then the Y value, for example 1.65,4.25.
3. Press the Spacebar or Enter.
4. Do one of the following: …
5. Press the Spacebar or Enter.

How do you draw a line with distance and bearing in Autocad?

To use the Bearings option to define direction

In the Toolspace, on the Toolbox tab, expand Miscellaneous Utilities Coordinate Geometry. Double-click Line by Direction and Distance. Select the end of a line from which the segment will be drawn.

How do I change the linetype in AutoCAD 2018?

Change the Linetype of Selected Objects

Right-click in the drawing area, and choose Properties from the shortcut menu. In the Properties palette, click Linetype, and then the down arrow. From the drop-down list, choose the linetype that you want to assign to the objects. Press Esc to remove the selection.

How do I add text to a line in AutoCAD?

Create Single-line Text

1. Click Home tab Annotation panel Single Line Text. …
2. Specify the insertion point. …
3. Enter a height or click to specify the height of the text. …
4. Enter an angle value or click to specify the rotation angle.
5. Enter the text. …
6. To create another single-line text, do one of the following:

How many line types are there in AutoCAD?

There are now four AutoCAD variables that govern your line type scale.