How do I create a reveal wall in Revit?

How do you create a wall profile in Revit?

In the drawing area, select the wall, and click Modify | Walls tab Mode panel Edit Profile. If the active view is a plan view, the Go To View dialog displays, prompting you to select an appropriate elevation or section view. When an appropriate view is open, the profile of the wall displays in magenta model lines.

How do you cut a void wall in Revit?

Solution:

1. Edit the in place wall.
2. Create a new void extrusion that will define the opening.
3. Use the “Cut” tool and select the void geometry.
4. Finish the solid edition.

How do I load a profile in Revit?

Load or sketch a profile. Click Modify | Sweep tab Sweep panel, and select a profile from the Profile list. If the profile you need is not already loaded in the project, click Modify | Sweep tab Sweep panel (Load Profile) to load the profile.

How do I create a custom wall sweep in Revit?

Click Architecture tab Build panel Wall drop-down (Wall: Sweep). In the Type Selector, select the desired type of wall sweep. Click Modify | Place Wall Sweep Placement panel, and select the orientation of the wall sweep: Horizontal or Vertical. Place the cursor over the wall to highlight the wall sweep location.

How do you blend in Revit?

To create a blend, select the blend command. You are placed in the Sketch mode. Select a tool from the Draw menu to draw a closed-loop sketch for the base of the blend. Once the base sketch is complete, click Edit Top on the Mode panel of the contextual tab.

Can you split a reveal in Revit?

What do you mean by splitting wall reveals? If you select a Hosted Sweep or Wall Reveal applied to a wall then you can select the grip control dots at either end and shorten up the sweep or reveal. Then add another sweep or reveal along the same position and shorten that own up.