How do I create a new body in SolidWorks?

How do I create a multi body part in Solidworks?

Saving an Assembly as a Multibody Part

1. Open an assembly document.
2. Click File > Save As. The Save As dialog box appears.
3. Set the Save as type to Part (*. prt, *. …
4. Select one of the following: Exterior Faces to save the exterior faces as Surface Bodies . …
5. Select or clear the following: …
6. Click Save.

How do I make different parts in Solidworks?

Creating a Part in an Assembly

1. Click New Part (Assembly toolbar) or Insert > Component > New Part.
2. Enter a name for the new part in the Save As dialog box and click Save.
3. Select a plane or planar face (while the pointer is ). …
4. Construct the part features, using the same techniques you use to build a part on its own.

What is a body in Solidworks?

A multibody part occurs within SOLIDWORKS when there is more than one continuous solid inside a single part file. A multibody part can be used as an intermediate step towards a single body or an as alternative to an assembly. While multibody parts should not replace assemblies, they can be a useful alternative.

How do you create a solid body in Solidworks?

To convert a boundary surface into a solid, click Insert > Surface > Boundary Surface, and in Options and Preview, click Create solid. To convert a trim-surface feature into a solid, click Insert > Surface > Trim Surface and in Surface Split Options, click Create solid.

How do you create a part in Solidworks 2020?

To create a part from a Toolbox component:

1. In the Design Library task pane, under Toolbox , expand the standard, category, and type of the component. …
2. Right-click the component and click Create Part.
3. In the PropertyManager, under Properties, specify property values. …
4. Click .

What is external reference in Solidworks?

An external reference is created when one document is dependent on another document for its solution. If the referenced document changes, the dependent document changes also. In an assembly, you can create an in-context feature on one component that references the geometry of another component.

Is it possible to create a new part in assembly mode?

You can create a new part in the context of an assembly. That way you can use the geometry of other assembly components while designing the part. You can also create a new subassembly in the context of another assembly.

How do you convert solid bodies to parts in SOLIDWORKS?

Saving Split Bodies

1. Click Insert > Features > Save Bodies.
2. Select the bodies to save in the graphics area, or under in Resulting Parts. …
3. Under Resulting Parts, double-click each file name under File to open the Save As dialog box. …
4. Select Consume cut bodies to copy cut-list items from multibody parts to resulting parts.

How do you duplicate parts in SOLIDWORKS?

To copy the feature to the part, hold CTRL , and select the Cut Feature in the FeatureManager Design Tree. While holding CTRL and the left mouse button, drag and drop the feature in the desired location.

How do you duplicate a feature in SOLIDWORKS?

To copy a feature:

1. Click Instant3D on the Features toolbar.
2. In the FeatureManager design tree, select the feature to copy.
3. Hold down Ctrl and drag the feature to a location on the same face or a different face.