How do I create a multiple area plan in Revit?

How do you create a new area plan in Revit?

Create an Area Plan

  1. Click Architecture tab Room & Area panel Area drop-down (Area Plan).
  2. In the New Area Plan dialog, for Type, select an area scheme.
  3. Select a level for the area plan view. …
  4. To create unique area plan views, select Do not duplicate existing views. …
  5. For Scale, select the area plan scale.
  6. Click OK.

How do you duplicate area plans in Revit?

Duplicate Area Plans to a Different Scheme

  1. Launch Ideate ViewCreator.
  2. Select the Duplicate Method.
  3. Select the rule called “*DUPLICATE” or “DUPLICATE — Change Family” if it is available. …
  4. Use “Select Views” to go to the next page.

What is an area scheme Revit?

Area schemes are definable spatial relationships. For example, you can have an area scheme showing the relationship between core and circulation spaces in a floor plan. You can create multiple area schemes. By default, Revit creates 2 area schemes: Gross Building: Total constructed area of a building.

How do you change an area property in Revit?

To modify the type properties, click Modify tab Properties panel (Type Properties). When you open the Family Editor, the palette displays family parameters by default. Review and modify properties of an element or view instance. Review and modify properties of an element or view type.

IT IS INTERESTING:  Can you export IFC from AutoCAD?

How do you make multiple floors in Revit?

Add Levels

  1. Open the section or elevation view to add levels to.
  2. On the ribbon, click (Level). Architecture tab Datum panel (Level) …
  3. Place the cursor in the drawing area and click. …
  4. Draw level lines by moving the cursor horizontally. …
  5. Click when the level line is the correct length.

How do you use plan regions in Revit?

Create a Plan Region

  1. Open a plan view.
  2. Click View tab Create panel Plan Views drop-down (Plan Region).
  3. Sketch a closed loop using lines, rectangles, or polygons.
  4. On the Properties palette, for View Range, click Edit.
  5. In the View Range dialog, specify the primary range and view depth.

What is an area plan?

Area plans, also known as community or neighborhood plans, serve to guide decisions about the physical development of a given community or district. These plans allow for specific, local application of the more broad based policies contained in the County General Plan.

How do you use area tags in Revit?

Add an Area Tag

  1. Open an area plan view.
  2. Click Architecture tab Room & Area panel Tag Room drop-down (Tag Area).
  3. On the Options Bar, do the following: Indicate the desired orientation of the area tag. …
  4. Click in an area to place the tag. Note: If areas overlap where you click to place a tag, then only one area is tagged.
Special Project