How do I center align in Solidworks?

How do you align in Solidworks?

Aligning Sketches

1. Select a line or a point in a sketch to be aligned with another sketch.
2. Hold Ctrl and select a line or a point in the second sketch to which the first sketch is to be aligned.
3. Click Align Sketch (2D to 3D toolbar), or click Tools > Sketch Tools > Align > Sketch.

How do you center a drawing in Solidworks?

Sketching Center Rectangles

1. Click Center Rectangle .
2. In the graphics area: Click to define the center. Drag to sketch the rectangle with centerlines. Release to set the four edges.
3. Click . Video: Sketching Center Rectangles.

How do you align components in Solidworks?

Align Components PropertyManager

1. Add the component by dragging it in the graphics area.
2. Right-click the component and click Align Components.

How do you center a part in the origin in Solidworks?

Click Tools > Sketch Tools > Align > Align Grid/Origin.

How do I align origins in Solidworks assembly?

In a sketch, click Tools > Sketch Tools > Align > Align Grid/Origin.

…

Move the sketch’s location based on relocating:

1. Only the sketch origin.
2. Only the X-axis or the Y-axis.
3. Both the sketch origin and either the X-axis or the Y-axis.

How do you align two lines in SolidWorks?

Align Between Lines

1. In the graphics area: Select one or more annotations. Select two horizontal or vertical lines. To use Align Between Lines in a part or assembly, you must be editing the sketch lines.
2. Click Align Between Lines. (Align toolbar), or click Tools > Align > Align Between Lines.

How do you Unfix a component in SolidWorks?

To fix or float an assembly component:

1. Right-click the component in the graphics area or the component’s name in the FeatureManager design tree.
2. Select Fix or Float.
3. In assemblies with multiple configurations, select This Configuration, All Configurations, or Specified Configurations.

What is Profile Center mate in SolidWorks?

Profile Center Mate automatically center-aligns geometric profiles to each other and fully defines the components. To create a profile center mate: In an assembly document with two rectangular or cylindrical profiles, click Mate . In the PropertyManager, under Advanced Mates, click Profile Center .

How do you move coordinates in SolidWorks?

Moving a Coordinate System

1. Click Coordinate System (Reference Geometry toolbar) or Insert > Reference Geometry > Coordinate System .
2. Define the coordinate system at a location on the part or assembly that provides the entities you need to control the angle and direction of each axis.

How do I Translate a part in SolidWorks?

Click Move/Copy Bodies (Features toolbar) or Insert > Features > Move/Copy . Specify parameters to move, copy, or rotate bodies. Apply mates between bodies. Click Translate/Rotate or Constraints at the bottom of the PropertyManager (if necessary) to switch to the page you want.

How do I move origin to center of mass in SolidWorks?

Select the Center of Mass in the Feature Manager Design Tree and click Reference Geometry / Coordinate System in the Features toolbar. In the Property Manager, make sure Center of Mass is in the Selections field and click the green check box. This will establish the Center of Mass as a Coordinate System.