How do I add a section line in Solidworks?

How do you show a section line in Solidworks?

To show a hidden cutting line, right-click on the section view and click Show Section Line. Use the section view sketch mode in conjunction with the section tool user interface to create both section views and aligned section views.

How do you draw a section line?

You draw a section line by specifying a start point, an endpoint, a length, and a height for the section. You can specify additional points between the start point and the endpoint to create jogs in the section. The section line acts as a cutting plane, slicing a section from the building model.

How do you create a section in Solidworks?

To create a section view manually:

1. Click Section View. (Drawing toolbar), or Insert > Drawing View > Section. …
2. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager.
3. Sketch a section line. …
4. Click to place the view.

How do I create a section view?

A full section view is generated by running the cutting plane through the entire length of the object being sectioned.

1. Click Layout tab Create View panel Section drop-down Full. …
2. Click the view you want to use as the parent view. …
3. Click in the drawing area to indicate the start point of the section line.

How do I create a section view in Solidworks assembly?

To create a section view:

1. In a part or assembly document, click Section View. …
2. In the Section View PropertyManager, under Section Method, select one of the following: …
3. In the Section View PropertyManager, under Section Option, select how the section offset is calculated: …
4. Under Section 1, select a plane.

How do I create an offset section view in Solidworks?

To insert an arc offset:

1. On the Section View popup, click .
2. Move the pointer. to the location of the first point of the arc and click. …
3. Move the pointer to the location of the second point of the arc and click.
4. Click. to close the Section View popup.
5. Drag the preview to a location and click to place the section view.

What are the section line symbols?

Section line symbols show the kind of material from which the part is to be constructed. The material may not be indicated symbolically if its exact specification is shown elsewhere on the drawing.

How are section lines shown?

Rule 1: A section lined area is always completely bounded by a visible outline. Rule 2: The section lines in all areas should be parallel. Section lines shown in opposite directions indicate a different part. Rule 3: All the visible edges behind the cutting plane should be shown.

How do I create a section view in CAD?

To create an offset section view through the part, on the Layout ribbon, in the Create View panel, use the Section tool. The Section tool generates a section view from any drawing view, and you can see in the tooltip that the actual command name is VIEWSECTION.