How do I add a particular line in Solidworks?

How do you add a line in SolidWorks?

To sketch a line:

1. Click Line. …
2. In the Insert Line PropertyManager under Orientation, select one of the following: …
3. Under Options, select: …
4. Under Parameters, you can do the following, based on the Orientation: …
5. Click in the graphics area and sketch the line. …
6. Complete the line in one of the following ways:

How do I edit lines in SolidWorks?

Right-click on an existing section view or its cutting line and click Edit Cutting Line. For some complex section views created with SOLIDWORKS 2013, you must select an insertion point before you can modify them. On the Section view pop-up, click an offset.

How do I manually add a dimension in SolidWorks?

You can specify that dimensions marked for drawings be inserted automatically into new drawing views. Go to Tools > Options and in the Document Properties tab, click Detailing. Select Dimensions marked for drawing under Auto insert on view creation.

How do you drag a line in SolidWorks?

To modify a line by dragging, in an open sketch, do one of the following:

1. To change the length of the line, select one of the endpoints and drag to lengthen or shorten the line.
2. To move the line, select the line and drag the line to another position.

How do I show a construction line in SOLIDWORKS?

Click Construction Geometry. on the Sketch toolbar. Click Tools > Sketch Tools > Construction Geometry. Select the For construction check box in the PropertyManager.

How do you fix a line in SOLIDWORKS?

To set a fixed length:

1. Select the spline to dimension.
2. Click Smart Dimension. …
3. Click anywhere on the spline to place the dimension and click. …
4. Drag an endpoint of the spline. …
5. To change the spline’s length, double-click the dimension and enter a new value in the Modify dialog box.

How do you show a section line in Solidworks?

To show a hidden cutting line, right-click on the section view and click Show Section Line. Use the section view sketch mode in conjunction with the section tool user interface to create both section views and aligned section views.

How do you create a hidden line in Solidworks?

Right-click the drawing view and select Properties. Select the Show Hidden Edges tab. Select a feature or component from either the drawing view or the FeatureManager design tree to add it to the list of items to be shown with hidden lines. Click Apply to see the effect of your selection.

How do I show only sections in Solidworks drawing?

Creating a Section View Manually

1. Click Section View. (Drawing toolbar), or Insert > Drawing View > Section. …
2. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager.
3. Sketch a section line. …
4. Click to place the view.

How do you add a dimension to a SOLIDWORKS 3D object?

Double-click one 3D sketch plane to make it active. Right-click on the edge of the 3D sketch plane to which you want to dimension, and select Smart Dimension. With the second plane selected, click inside the active plane to add the dimension.

How do you add a part to a drawing in SOLIDWORKS?

With a part document open, click Insert Part (Features toolbar) or Insert > Part. Browse to a part document and click Open. The Insert Part PropertyManager appears. Under Transfer, select any combination of items from the inserted part to be included in the derived part.

How do you switch between arc and line in SolidWorks?

To autotransition between line and arc:

1. Click Line. (Sketch toolbar) or click Tools > Sketch Entities > Line and sketch a line.
2. Click the endpoint of the line, then move the pointer away. …
3. Move the pointer back to the endpoint, then away again. …
4. Click to place the arc.
5. Move the pointer away from the arc endpoint.

How do you move around in SolidWorks?

Do one of the following:

1. Press Alt + middle mouse button and drag.
2. On the main toolbar, click Camera Tools > Pan , then click and drag.

How do you move parts in SolidWorks?

Move Drawing

1. Right-click the drawing name at the top of the FeatureManager design tree and select Move.
2. Type a value in the X value or Y value box, and click Apply. All of the drawing entities move the specified distance in the X or Y direction.
3. Click Close to exit the dialog box.