How do I add a mate reference in SolidWorks?

How do you create an automatic mate in SOLIDWORKS?

The Mate References must share the same names and the same mating items must be selected for both part files.

1. Run Mate Reference Command.
2. Assign Reference Mates for Knob and Crank Handle.
3. Drag the Knob Model into Assembly to Snap in Place.
4. Assign Reference Mates for Crank Shaft and Crank Handle.

How do you add angle mates in SOLIDWORKS?

Click Mate (Assembly toolbar) or Insert > Mate. In the Mate PropertyManager, for Entities to Mate , select two entities in the graphics area or the flyout FeatureManager design tree. Under Standard Mates, click Angle and set the dimension.

Why are mates not working in SOLIDWORKS?

Try these actions, which sometimes fix the problem: Drag a component to snap it into place. Suppress and unsuppress the affected mates. If the components are far from their correct positions, suppress some of their mates, move the components closer to their correct positions, then unsuppress the mates.

How do you check mates in SOLIDWORKS?

Hold down Ctrl, click the components, and then right-click. Right-click the subassembly in the FeatureManager design tree. Click View Mates . The View Mates window appears.

What is mate in SolidWorks?

Mates create geometric relationships between assembly components. As you add mates, you define the allowable directions of linear or rotational motion of the components. You can move a component within its degrees of freedom, visualizing the assembly’s behavior.

What is a concentric mate in SolidWorks?

See SolidWorks Help: Coincident Mate. Concentric mates allow you to align the axis of a curved or cylindrical face with the axis of another. This mate is ideal for aligning holes and other curved faces.

How do you use slot mate in SolidWorks?

Slot Mates

1. Click Mate (Assembly toolbar) or Insert > Mate.
2. In the PropertyManager, expand Mechanical Mates and select Slot .
3. For Mate Selections, select a slot face and the feature to mate to it: The face of another straight or angular slot. An axis. …
4. Select a constraint option: Option. Description. …
5. Click .

How do you make a path mate in SolidWorks?

To add a path mate:

1. Click Mate (Assembly toolbar) or Insert > Mate.
2. In the PropertyManager, under Advanced Mates, click Path Mate .
3. Under Mate Selections: …
4. Under Advanced Mates, for Path Constraint, select one: …
5. For Pitch/Yaw Control, select one: …
6. For Roll Control, select one: …
7. Click .

How do you use linear coupler mate in SolidWorks?

To add a linear/linear coupler mate:

1. Click Mate (Assembly toolbar) or Insert > Mate.
2. In the PropertyManager, on the Advanced tab, click Linear/Linear Coupler .
3. Under Mate Selections, select the following: Option. Description. Entities to Mate. …
4. Under Mate Type, for Ratio, enter values for: Option. Description. …
5. Click .

How do you fix mates in Solidworks?

Try these actions, which sometimes fix the problem:

1. Drag a component to snap it into place.
2. Suppress and unsuppress the affected mates.
3. If the components are far from their correct positions, suppress some of their mates, move the components closer to their correct positions, then unsuppress the mates.

How do you copy mate parts in Solidworks?

To copy mates when you copy a component:

1. Click Copy with Mates. (Assembly toolbar) or Insert > Component > Copy with Mates.
2. Set options in the PropertyManager.
3. Click . The PropertyManager remains open so you can create additional instances of the component.
4. Click. again to close the PropertyManager.

How do I edit a mate in Solidworks?

To modify a mate:

1. Expand the Mates folder in the FeatureManager design tree. …
2. In the PropertyManager, select the mate to edit and change the options. …
3. To replace one entity with another, click the entity to replace in the Mate Selections box, press Delete, then select the new entity.
4. Click .

Do assemblies have reference planes?

Reference planes exist in the Part, Sheet Metal and Assembly environments. You can use both part and assembly reference planes to position parts in an assembly. To make the assembly display more cleanly, reference planes for parts and subassemblies are displayed only when you place and edit them.

Do assemblies have reference planes in Onshape?

@james_close We do not allow planes in the Assembly however you can use mate connectors which can be added to the assembly origin. Hi, Thanks for the comment. You allow Parts, Sketches and Surfaces defined in a Part Studio to be Inserted to an Assembly.

Which mate allows the most degrees of freedom?

In Onshape there is just one Mate between any two parts, and therefore the movement (degrees of freedom) between those two parts embedded within the Mate.

…

Mates in Onshape & their Types [2020]