How do I add a design table in Catia?

How do I import a design table into CATIA?

Here are the main steps to follow:

1. Select the pre-existing file containing the raw data.
2. Create the associations between the document parameters and the external table columns. …
3. Edit the generated CATIA design table.
4. Select a configuration in the generated design table. …
5. Apply the design table feature to your document.

What is CATIA design table?

In CATIA V5 you use design tables to create multiple variations of a part or assembly. The part or assembly is generic, but the design table is checked in as multi-primary content. Design tables reside in the same directory as the part within your workspace local directory.

How do I edit a design table in CATIA V5?

To edit the table click “Edit Table” in the bottom left hand corner of the dialog box; the design table will open as an Excel spreadsheet. 8. Insert the values in each row to add different design options.

How do I edit a table in Catia?

Create a new sheet and a new view.

1. Click Table in the Annotations toolbar.
2. Click a point in the drawing to specify the table position. Tables cannot be associative. …
3. In the Table Editor dialog box that appears, enter the number of columns and rows you want for the table. …
4. Click OK to validate the table creation.

How do I add an existing component to Catia V5?

Open the ManagingComponents02. CATProduct document. In the Specification Tree, select ManagingComponents02 and click the Existing Component icon. The Insert an Existing Component dialog box is displayed.

What is a part design?

The Part Design course is designed to teach you the fundamentals of the CATIA V5 R21 Part Design workbench. Modeling techniques used to create and edit designs and feature-based solids are explored. Course topics include sketch-based features, dress up features, and patterns.

Is it possible to create a new part in assembly mode in Catia?

6.2.3 Inserting a New Part

select Product1 and click the New Part icon . If geometry exists in the assembly, the New Part: Origin Point dialog box is displayed, proposing two options to locate the part: Click Yes to locate the part origin point on a selected point, on another component for example.