Frequent question: What are the two necessary elements to create a sweep in Solidworks?

What is Sweep feature?

Sweep features are defined by using custom 2D cross-section (or face) moved along a pre-set path to create a 3D shape or surface. With the sweep method, the user defines a 2-D or 3-D guide curve, in addition to creating the cross-section.

How many sketches do we need to use the feature swept boss?

The SOLIDWORKS Sweep feature has been improving over the years; unlike Extrude the Sweep feature requires at least two sketches to be selected, namely the Profile and Path.

How do you do a sweep?

Create a Sweep

1. In the Family Editor, on the Create tab Forms panel, do one of the following. …
2. Specify the sweep path: …
3. On the Mode panel, click (Finish Edit Mode).
4. Load or sketch a profile. …
5. On the Properties palette, specify the sweep properties. …
6. On the Mode panel, click (Finish Edit Mode).

What is sweep command in Solidworks?

SWEEP is the one feature in Solidworks that helps sweep a closed profile along a closed or open path. In this session, we are going to use a simple 3D object as an exercise to demonstrate the use of the SWEEP command in Solidworks.

What is sweep program?

In a sweep program, a bank’s computers analyze customer use of checkable deposits and sweep funds into money market deposit accounts. Some brokerage accounts have similar features that enable investors to gain some additional return for unused cash.

What is sweep facility?

A Sweep In or auto sweep facility is a balance that’s in excess of the stipulated amount which is transferred into a fixed deposit for a tenure of 1 year. The amount transferred will earn you a higher rate of return.

What is sweep in and sweep out?

In the sweep out/sweep in facility, excess amount over an agreed minimum amount is converted into fixed or term deposits in the system, which earn higher interest of, say, 6-7% per annum.

What is required to create a solid using the swept boss base tool?

There are two main requirements to create a Swept Boss or Base: A closed profile and a path. This first example will show how to create a sweep using a circular profile and an open relatively linear path. Figure 1, below, shows the profile drawn on the front plane and the sweep path drawn on the top plane.

What is required to create a solid using the extruded boss base tool?

Oftentimes when creating solid models, we need an extrusion to go a certain distance in one direction and a different distance in the other direction. In this case, we chose to go 20mm in Direction 1, which is up, and 7.5mm in Direction 2, which is down.

What are applied features in SolidWorks?

Applied features such as chamfers, fillets, and shells are applied directly to the model.

How do you sweep a curve in SolidWorks?

Use a sketch, existing model edges, or curves. Click one of the following: Swept Boss/Base on the Features toolbar or Insert > Boss/Base > Sweep. Swept Cut on the Features toolbar or Insert > Cut > Sweep.

…

Creating a Basic Sweep.

What is loft in SolidWorks?

The loft feature is an important tool for (surface) modeling in SolidWorks. The loft feature creates a shape by making transitions between multiple profiles and guide curves. This tool is very valuable for modeling complex surfaces. You can do some really cool stuff when you use this feature properly.