Frequent question: How do you use thicken feature in SolidWorks?

How do I change thickness in Solidworks?

To set line thickness:

1. In a drawing, click Tools > Options > Document Properties > Line Thickness.
2. In the dialog box, under Line thickness print settings, enter a value for the line weights (Thin, Normal, Thick, and five additional line thickness settings). …
3. Click OK.

How do you add material thickness in Solidworks?

In the dialog box:

1. Right-click Custom Materials and click New Category.
2. Right-click New Category and click New Material.
3. Set the custom material properties on each tab as required.
4. Click the Sheet Metal tab. …
5. Select Thickness Range.
6. Click Add twice.
7. For each row in the table, set the following: …
8. Click Apply and Close.

How do you make a part thinner in Solidworks?

You can scale a part or surface model about its centroid, the model origin, or a coordinate system. To scale a solid or surface model: In a part document, click Scale (Features toolbar) or Insert > Features > Scale . Set options in the PropertyManager.

Where is the thickness on Solidworks?

You can find the Thickness Analysis tool in the Evaluate tab of your Command Manager or in the Tools dropdown at the top right. Thickness Analysis is part of the SOLIDWORKS Utilities add-in, which contains a suite of tools used to evaluate solid geometry.

How do you thicken a lofted surface in Solidworks?

To thicken a surface:

1. Click Thicken on the Features toolbar, or click Insert > Boss/Base > Thicken.
2. Under Thicken Parameters, do the following: In the graphics area, select a Surface to Thicken . Examine the preview, and select the side of the surface you want to thicken, as shown below. …
3. Click OK . Original surface.

How do you mirror a thickened surface in Solidworks?

To mirror a feature: Do one of the following: In a part, click Mirror (Features toolbar) or Insert > Pattern/Mirror > Mirror. In an assembly, click Assembly Features (Assembly tab on the CommandManager) and click Mirror , or click Insert > Assembly Feature > Mirror.

How do you use boundary surfaces in Solidworks?

To create a boundary surface feature, click Boundary Surface (Surface toolbar) or Insert > Surface > Boundary Surface, set the PropertyManager options, then click . Curve callouts colors match those used in the PropertyManager. Click callouts to change the Tangent Type.

How do you offset a face in Solidworks?

Offset Surface

1. Click Offset Surface (Surfaces toolbar) or Insert > Surface > Offset.
2. In the PropertyManager: Select surfaces or faces in the graphics area for Surface or Faces to Offset . Set a value for Offset Distance. You can create an offset surface with a distance of zero. …
3. Click OK .

How do you enlarge a drawing in Solidworks?

You can change the scale of a drawing sheet by selecting a scale from a predefined list or specifying a custom scale. To change the scale of an existing drawing sheet: In the status bar, click Sheet Scale and click a scale. If there are annotations in the drawing sheet, specify options in the dialog box and click OK.