How do you merge sketches?
Usage
- Select two or more sketches.
- Click on Merge sketches or choose Sketch → Merge sketches from the top menu.
- The resulting sketch will be created as a separate new object.
Can I merge sketches in Fusion 360?
There is no separate command to combine two sketches into one. However one option is you can Project one sketch into another using the Sketch->Project/Include->Sketch command.
How do you duplicate a sketch in Fusion 360?
To copy and paste a sketch into another sketch, perform the following:
- Select the sketch entities to be copied (either left-click or window select).
- Right-click and select Copy.
- Click to deselect the copied entities. …
- Edit Sketch or Create Sketch so that sketch mode is active.
- Right-click and select Paste.
How do you use a joint in Fusion 360?
Create a joint between the shaft and the gear housing
In the Model workspace, choose Assemble > Joint. In the Joint dialog, set Motion Type to Revolute. Fusion 360 enables the required degrees of freedom for the motion type. Fusion 360 automatically chooses the Z axis, but you can specify another axis if necessary.
Can you combine sketches in Inventor?
To combine the two 2D sketches into a single 3D sketch, you must create a new 3D sketch and use the Intersection Curve tool, which is shown below. The Intersection Curve tool allows the user to combine two 2D sketches to generate the geometry for a 3D sketch.
How do I combine two pictures in SketchBook?
Merging layers in SketchBook Pro Mobile
- In the Layer Editor, tap a layer to select it. Ensure the layer to be merged is above the one it will be merged with. If it isn’t, reposition it. See How to reorder layers.
- Double-tap a layer to access the Layer menu.
- Tap to merge two layers or. to merge all.
- Then, tap OK.
How do you copy a body from one design to another on Fusion 360?
You can copy Components between designs, so if the body is in a component on it’s own, select the component and Copy change to the other design right click on the canvas and select Paste New. If the body is in a component with other bodies you’ll have to use Create components from bodies first.