Frequent question: How do I edit text in Draftsight?

How do you write text in Draftsight?

Creating Notes

  1. Click Draw > Text > Note (or type Note).
  2. In the graphics area, specify the first corners of the text box.
  3. Note: The text box roughly locates the placement for the Text but essentially determines the line length. …
  4. Specify the opposite corner of the text box or specify an option: …
  5. Type and format the text.

How do I change the font in Draftsight?

Select Format > Text Style (or type TextStyle). In the Options dialog box, the Drafting Styles page opens and Text expands. In Style, select a TextStyle.



Under Text, set:

  1. Font. Lists all installed TrueType fonts provided with your operating system by font family name. …
  2. Format. …
  3. Big font.

How do I change dimension text in Draftsight?

To modify Dimension text:

  1. Type ReplaceDimensionText at the command prompt.
  2. Type the new Dimension text value. Type a text value or <> to represent the generated measurement. …
  3. In the graphics area, select Dimensions and press Enter. The text of the selected Dimensions updates.

How do you edit a component in Draftsight?

In-Place Editing of Components

  1. Click Modify > Component > Edit (or type EditComponent at the command prompt).
  2. In the graphics area click a Block or Reference to edit.
  3. From the list in the Edit Component dialog box, select the name of a Block or Reference:
IT IS INTERESTING:  You asked: Why is AutoCAD file so large?

How do you insert a textbox in Autocad?

Start the Multiline Text command, and pick a spot in the drawing. Drag the cursor over to create a ‘rectangle’ to represent the area you want your text in, and pick the other corner. As soon as you pick the second point, the full Multiline text editor will appear. Type your text, and press OK when done.

How do you change a dimension value?

Change a Dimension Value

  1. Select an element that the dimension references.
  2. Click the dimension value. If the dimension is locked, the lock control appears next to it. …
  3. In the edit box, type a new value for the dimension, and press Enter . The element moves to satisfy the new dimension requirement.

How do you rotate text size in Solidworks 2019?

Search ‘Rotating Dimension Text’ in the SOLIDWORKS Knowledge Base.



To rotate Dimension text:

  1. Type RotateDimensionText at the command prompt.
  2. Specify the angle to rotate the Dimension text.
  3. In the graphics area, select Dimensions, and press Enter. The text of specified Dimensions rotates about the specified angle.

How do I get out of reference editing in Draftsight?

To end in-place editing of a Block definition or Reference: Click Modify > Component > Close (or type CloseComponent at the command prompt). Click Discard to end Component editing without saving the changes.

How do I get out of edit block in-place?

To end in-place editing of a Block definition or Reference:

  1. Click Modify > Component > Close (or type CloseComponent at the command prompt).
  2. In the Component dialog box, click Save to save the changes of the Block definition or Reference you have edited. – or –
IT IS INTERESTING:  How many basic selection processes are there in autocad?

How do you exit reference editing?

Additional adoptions:

  1. Right-click the Save Reference Edits button. Click Customize.
  2. In the Customize User Interface dialog box, expand ACADM > Toolbars > Refedit and select Save Reference Edits.
  3. In the Macro line, replace “_refclose” with “_amrefclose”.
  4. Click Apply and then click OK.
Special Project