Can you do a sweep cut in Solidworks?

Can you sweep a body in Solidworks?

For cut sweeps only, you create a solid sweep by moving a tool body along a path. The path must be tangent within itself (no sharp corners) and begin at a point on or within the tool body profile.

…

Sweeps.

Can you sweep in assembly solidworks?

Optionally, for the path and guide curves, create sketches or curves in the top level of the assembly. Alternatively, you can use edges of components at any level of the assembly. Click Assembly Features (Assembly tab on the CommandManager) and click Swept Cut , or click Insert > Assembly Feature > Cut > Sweep .

What is sweep command in Solidworks?

SWEEP is the one feature in Solidworks that helps sweep a closed profile along a closed or open path. In this session, we are going to use a simple 3D object as an exercise to demonstrate the use of the SWEEP command in Solidworks.

How do you cut a body in SolidWorks?

To cut a solid body with a surface or plane:

1. Edit the solid body: In the FeatureManager design tree, click the solid body and click Edit Part. …
2. Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface.

How do you use surface trim?

To trim a surface:

1. Create two or more surfaces that intersect at one or more points, or create a surface that intersects with a plane or has a sketch on its face.
2. Click Trim Surface on the Surfaces toolbar, or click Insert > Surface > Trim.
3. In the PropertyManager, under Trim Type, select a type:

How do I make a part from assembly sketch?

Creating a Part in an Assembly

1. Click New Part (Assembly toolbar) or Insert > Component > New Part.
2. Enter a name for the new part in the Save As dialog box and click Save.
3. Select a plane or planar face (while the pointer is ). …
4. Construct the part features, using the same techniques you use to build a part on its own.

When creating a swept cut assembly feature where must the sketch for the profile reside?

When creating a Swept Cut as an assembly feature: For Profile , the sketch you select must be in the top level of the assembly. You can select faces, edges, and curves directly from models as sweep profiles.

How do you sweep an object in SolidWorks?

To create a sweep: Sketch a closed, non-intersecting profile on a plane or a face.

…

Click one of the following:

1. Swept Boss/Base on the Features toolbar or Insert > Boss/Base > Sweep.
2. Swept Cut on the Features toolbar or Insert > Cut > Sweep.
3. Swept Surface on the Surfaces toolbar or Insert > Surface > Sweep.

How do you cut a boundary in SolidWorks?

How to Use SolidWorks Boundary Cut Tutorial?

1. Step 1: Create a Part File. …
2. Step 2: Sketch the Profile. …
3. Step 3: Apply Extrude Boss to Create Rectangular Plate. …
4. Step 4: Sketch Two Circle Profiles on Opposite Faces. …
5. Step 4: Select SolidWorks Boundary Cut Feature Tool. …
6. Step 5: Apply SoildWorks Boundary Cut Feature.

How do you do a sweep?

Create a Sweep

1. In the Family Editor, on the Create tab Forms panel, do one of the following. …
2. Specify the sweep path: …
3. On the Mode panel, click (Finish Edit Mode).
4. Load or sketch a profile. …
5. On the Properties palette, specify the sweep properties. …
6. On the Mode panel, click (Finish Edit Mode).

How do you sweep an angle in Solidworks?

In a part, click Insert > Boss/Base > Sweep. In the PropertyManager, under Profile and Path, click Sketch Profile and do the following: In the flyout FeatureManager design tree, select Sketch8 for Profile and select Helix/Spiral1 for Path. Click Direction 1 and Direction 2 to toggle the direction of the sweep.