Can you copy a sketch into another part in Solidworks?

How do you copy a sketch in Solidworks?

In SOLIDWORKS you can copy and paste: Sketches.

…

Create Drawing View with Copy and Paste

1. Pick the top of a feature tree for a component and select Edit > Copy.
2. Then go to a drawing and select Edit > Paste.
3. SOLIDWORKS has now inserted, or pasted, a copy of that component in a model view in the drawing.

How do I copy a drawing from one drawing to another in Solidworks?

Click Cut. or Copy. (Standard toolbar), or click Edit > Cut or Copy. Change to the target sheet or drawing document, click where you want to paste the view, and click Paste (Standard toolbar) or click Edit > Paste.

How do I copy a feature from one part to another in Solidworks?

To copy features from one part to another part, tile the windows, then drag the features from one window to another, or use Copy and Paste (Standard toolbar).

How do I turn a drawing into a part in Solidworks?

To import a drawing into a part document:

1. Open the drawing (. dwg or . …
2. In the DXF/DWG Import dialog box, select Import to a new part and click Next.
3. On the Drawing Layer Mapping tab, edit the sheet name and click Next.
4. On the Document Settings tab, select Import this sheet and to a 2D sketch.
5. Click Finish.

How do you copy a sketch from one part to another?

Copying and Pasting Entire Sketches

1. Select the closed sketch in the FeatureManager design tree.
2. Click Edit > Copy or press Ctrl+C.
3. Click in the sketch or document where you want to paste the center of the sketch.
4. Click Edit > Paste or press Ctrl+V.

How do you split a sketch into multiple sketches in Solidworks?

To split a sketch entity:

1. In an open sketch, click Split Entities. (Sketch toolbar) or Tools > Sketch Tools > Split Entities . …
2. Click the sketch entity at the location where you want the split to occur. The sketch entity splits into two entities, and a split point is added between the two sketch entities.

How do you combine sketches in Solidworks?

To combine two split sketch entities into one: In an open sketch, click the split point and press Delete. Search ‘Combining Split Entities’ in the SOLIDWORKS Knowledge Base.

How do you copy and paste a sketch in Fusion 360?

To copy and paste a sketch into another sketch, perform the following:

1. Select the sketch entities to be copied (either left-click or window select).
2. Right-click and select Copy.
3. Click to deselect the copied entities. …
4. Edit Sketch or Create Sketch so that sketch mode is active.
5. Right-click and select Paste.

Can you move a feature in Solidworks?

You can move your features within a model by just dragging the features up and down in the feature tree.

How do you copy and paste a body in Solidworks?

Click Move/Copy Bodies (Features toolbar) or Insert > Features > Move/Copy. Specify parameters to move, copy, or rotate bodies. Apply mates between bodies. Click Translate/Rotate or Constraints at the bottom of the PropertyManager (if necessary) to switch to the page you want.

How do you convert 2D sketch to 3D sketch in SOLIDWORKS?

2D to 3D Conversion Overview

1. In a part document, import a drawing into a sketch or construct a new sketch.
2. Edit the sketch.
3. Extract sketches for views from the Front, Top, and so on. The sketches fold up into the appropriate orientation.
4. Align the sketches.
5. Extrude the base feature.
6. Cut or extrude other features.

How do I create a particular drawing in SOLIDWORKS?

To create a drawing from within a part or assembly document:

1. Click Make Drawing from Part/Assembly (Standard toolbar or New flyout menu).
2. Select options for Sheet Format/Size, then click OK.
3. Drag views from the View Palette into the drawing sheet, and set options in the PropertyManager.

How do I export a 2D drawing from SOLIDWORKS?

Exporting Drawings as DXF or DWG

1. Click File > Save As.
2. In the dialog box, for Save as type, select DXF or DWG.
3. Click Options.
4. Set options and click OK. …
5. In the Save As dialog box, type the file name and click Save.
6. If the SOLIDWORKS to DXF/DWG Mapping dialog box appears, specify mapping options and click OK.