Best answer: Where is the Flex feature in Solidworks?

How do you change the bend axis flex in SolidWorks?

Example of Flex Bending

1. Move the pointer over the triad arrows to display the drag/rotate pointer. . …
2. Move the pointer over the trim plane manipulators to display the move pointer . …
3. Move the pointer over the edge of the trim planes to display the bending pointer .
4. Drag the trim planes to bend and modify the flex feature.

How do you bend part in SolidWorks?

To create a sketched bend feature:

1. Sketch a line on a planar face of the sheet metal part. …
2. Click Sketched Bend. …
3. In the graphics area, select a face that does not move as a result of the bend for Fixed Face .
4. Click a Bend position of Bend Centerline , Material Inside , Material Outside , or Bend Outside .

How do you insert a flexible cable in SolidWorks?

Creating Flexible Ribbon Cable Routes

1. Insert the first ribbon cable connector into the assembly. …
2. Insert the second ribbon cable connector, and, optionally, ribbon cable clips.
3. In the Auto Route PropertyManager, under Routing Mode, select Auto-Route.
4. Under Auto Route, select Flexible.
5. Define the path of the cable:

Can you create a bend in Solidworks?

To create a sketched bend feature: Sketch a line on a planar face of the sheet metal part. Alternatively, you can select the sketched bend feature before you create a sketch (but after you select a plane). When you select the sketched bend feature, a sketch opens on the plane.

How do I stretch in Solidworks?

Stretching Sketch Entities

1. Click Base point. and then click on the sketch to set a base point.
2. Drag to stretch the sketch entities. When you release, the entities stretch to that point and the PropertyManager closes.

How do you bend a part in Solidworks 2020?

It is possible to create a solid part, then convert it to sheet metal to add the bends and sheet metal features. on the Sheet Metal toolbar, or click Insert > Sheet Metal > Bends, two distinct stages are applied to the sheet metal part.

How do you add bend notes in Solidworks?

In any sheet metal part, right click on the flattened pattern and select ‘Insert bend notes. ‘ The flattened pattern includes all of the bend notes on the flattened view. This includes the bounding box in the 2D view for easy reference.